بررسی سنتز و خواص آنتی اکسیدانی کلسیم هگزابوراید

نوع مقاله : علمی و پژوهشی

نویسندگان

1 دانشگاه علم و صنعت

2 دانشگاه آزاد اسلامی واحد علوم و تحقیقات

3 دانشگاه تحصیلات تکمیلی صنعتی و فن آوری پیشرفته، کرمان

چکیده

در این مطالعه، پودر کلسیم هگزا بوراید (CaB6) از طریق سنتز احتراقی تهیه و خاصیت آنتی اکسیدانی آن بررسی شد. الگوهای پراش اشعه ایکس محصولات به دست آمده از فرآیند سنتز احتراقی بعد از شستشو با عوامل شیمیایی مناسب که در آن منیزیم به عنوان عامل احیا کننده استفاده شده بود فقط حضور کلسیم هگزابوراید را نشان دادند، در حالی که وقتی از آلومینیوم و سیلسیم به عنوان عوامل احیا کننده استفاده شد، علاوه بر کلسیم هگز ابوراید، اکسید مربوط به همان عناصر هم مشاهده شدند. کلسیم هگزا بوراید سنتز شده با عامل احیا کننده منیزیم مقاومت به اکسیداسیون بهتری داشت.
 

کلیدواژه‌ها


عنوان مقاله [English]

Investigation on Synthesis and Antioxidant Properties of Calcium Hexaborid

نویسندگان [English]

  • Seyed masoud hoseini mighan 1
  • Rahim Naghizadeh 1
  • Hamid Reza Rezaie 1
  • Negin Moradi Yazdi 2
  • Milad Talebian 3
1
2
3
چکیده [English]

Calcium hexaboride has high melting point (2372K), high hardness (27 GPa), low density (2.45 g/cm3), high Young's modulus (379 GPa) and low thermal expansion. This material has capability for using in composite and as an antioxidant in Oxide-graphite refractories. Synthesis of calcium hexaboride by different processes as hydrothermal, solid state and combustion synthesis are done. CaB6 as an antioxidant in MgO-C refractories can reduce the oxidation of graphite. In this study synthesis and application of CaB6 as an antioxidant are investigated.

کلیدواژه‌ها [English]

  • Calcium Hexaboride
  • Combustion Synthesis
  • Magnesia Carbon Brick
  • Antioxidant
1. Matsushita, J., and Komarneni, S., “High temperature oxidation behavior of CaB6 sintered body,” Journal of material science, Vol. 34, pp. 3043-3046, )1999(.
2. Huang, X., Zhong, J., Dou, L., and Wang, K., “Combustion synthesis of CaB6 powder from calcium hexa borate and Mg,” Journal of refractory metals and hard materials, Vol. 28, pp. 143-149, )2010(.
3. Shughi, Zh., Guanghui, M., Zengda, Z., Huashun, Y., and Jiande, H., “Synthesis of calcium hexaboride powder via the reaction of calcium carbonate with boron carbide and carbon,” Communication of the American ceramic society, Vol. 84, pp. 2725-2727, )2001(.
4. Lin, Zh., Guanghui, M., and Huashun, Y, "Reaction mechanism and size control of CaB6 micron powder synthesized by the boron carbide method," Ceramic international, Vol. 35, pp. 3533-3536, (2009).
5. Yildiz, O., Telle, R., Schmalzried, C., and Kaiser, A., "Phase transformation of transient B4C to CaB6 during production of CaB6 from colemanite," Journal of the European ceramic society, Vol. 25, pp. 3375-3381, )2005(.
6. Zhang, S., Marriott, N.J., and Lee, W.E., "Thermochemistry and microstructures of MgO-C refractories containing various antioxidants," Journal of the European ceramic society, Vol. 21, pp. 1037-1047, )2001(.
7. Zhang, S., and Lee, W.E., "Influence of additives on corrosion resistance and corroded microstructures of MgO-C refractories," Journal of the European ceramic society, Vol. 21, pp. 2393-2405, )2001(.
8. Jallay,M., Tamizifar,M., Bafghi,M.Sh.,Gotor.F.J., “Mechanochemical synthesis of ZrB2-SiC-ZrC nanocomposite powder by metallothermic reduction of zircon”Journal of alloys and composites,581,782-787,(2013).
9. Yildiz.O., “The effect of heat treatment on colemanite processing: A ceramics application” powder Technology, Vol. 142, pp. 7-12,(2004).
10. Siljan, O.J., Hydro, N., Rian, G., Pettersen, D.T., Solheim, A., and Schøning, C., "Refractories for molten aluminum contact part 1: Thermodynamics and kinetics", Refractories Applications and news. Vol.7,pp. 17-25,(2002).
11. Zhang,L., Guanghui,M.,Huashun,Yu.,”Reaction mechanism and size control of CaB6 micron powder synthesized by the boron carbide method”, ceramic international, Vol. 35,pp.3533-3536,(2009)
12. Khezrabadi,M.,N., Javadpour,J., Rezaie,H.R.,Naghizadeh,R “The effect of additives on the properties and microstructure of Al2O3-C refractories” Journal of Materials Science, Vol. 41, pp.3027-3032, (2006).
13. Hanagiri,S., Harada.T. Aso,S., Fujihara,S., “Effect of the addition of metal and CaB6 to Magnesia carbon bricks for converters”, Taikabutsu overseas, Vol. 44, No. 9, pp.490-498,(1992).
14. Zheng,S.Q, Min,G.H., Zau,Z.D,Tatsuyama,C.,”High temperature oxidation of calcium hexaboride powders” materials letter, Vol.58, pp.2586-2589,(2004)
15. Low,I.M., Lim, F.W., Slow, S., “Synthesis of highly leachable gel-derived alumina ceramic cores” Journal of materials Science letter, Vol. 12, pp.1570-1573,(1993).
CAPTCHA Image