Journal Of Metallurgical and Materials Engineering

Author = sepide pourhashem

The Effect of Heat Treatment on Magnetic Properties of Fe78Si9B13 Amorphous Ribbons

Volume 23, Issue 2, November 2012

10.22067/ma.v23i2.16937

Reza Bakhtiari; Ali Jazayeri Gharehbagh; Mehdi kiani; bhzad Binesh

The Effect of Velocity of the Melt Entering the Die Cavity on Fracture Toughness of AZ91 Magnesium Alloy

Volume 23, Issue 2, November 2012

10.22067/ma.v23i2.16993

hamid reza Saadatifar; mehdi Mirzaei; S. hosin Razavi; s.mohamad Ali botorabi

An Investigation into the Morphology of Short-Time Oxide Films in Molten Pure Aluminum

Volume 23, Issue 2, November 2012

10.22067/ma.v23i2.16996

bhzad Naebi; mehdi Divandari; S. Amir Azarmehr

A Study on the Effect of Al2O3 Nano-particles on Aging Behavior and Mechanical Properties of Al-4.5wt.%Cu/Al2O3 Composites Produced by Stir Casting

Volume 23, Issue 2, November 2012

10.22067/ma.v23i2.16998

Nasibe Valibeygloo; Rasol A. Khosroshahi

The Effect of Bi2O3 Addition on Liquid-Liquid Phase Separation, Crystallization and Dielectric Properties of Ferroelectric Glass-Ceramics in PbO-TiO2-SiO2-B2O3 System

Volume 23, Issue 2, November 2012

10.22067/ma.v23i2.16999

S. mohamad Mirkazemi; samira golzardi; vahak marghosian; Ali Beitollahi; faezeh Sadooghi

Recovery of INCONEL738 Superalloy from Used Gas Turbine Blades by ESR Method

Volume 23, Issue 2, November 2012

10.22067/ma.v23i2.17000

Ali Farnia; shahram Raygan; hosin Abdizadeh; kazem Hanaei

Optimization of Preliminary Treatment on the Surface of Boron Nitride Particles for Ni-P Electroless Coating

Volume 23, Issue 2, November 2012

10.22067/ma.v23i2.17001

masoud Moshrefifar; Amin hakimi zad

The Effect of Hot Deformation on the Microstructure of AZ91 Magnesium Alloy

Volume 23, Issue 1, May 2012

10.22067/ma.v23i1.12838

Ali reza maldar; ramin Ebrahimi; gholam reza Ebrahimi

Analytical Evaluation of the Effect of Die and Punch Profile Radii on Deep Drawing Force

Volume 23, Issue 1, May 2012

10.22067/ma.v23i1.12839

mostafa Mansourinejad; bahman Mirzakhani

Modeling the Thermal Spray Process for the Formation of Surface Coatings using the Stochastic Methods

Volume 23, Issue 1, May 2012

10.22067/ma.v23i1.12840

Ebrahim kamali; Ali reza Teymourtas; mohamad Passandideh Fard

Effect of the Number of Nodular Graphite Particles per unit Area on the Distribution of Hard Phase in Ferritie-Martensite Dual-Phase Ductile iron

Volume 23, Issue 1, May 2012

10.22067/ma.v23i1.12841

morteza Lakzaei; shahram Kheirandish

Study of the effect of Homogenization Treatment via Partial Melting on the Microstructure and Mechanical Properties of Austempered Ductile Iron

Volume 23, Issue 1, May 2012

10.22067/ma.v23i1.12842

masod Mosallaee Pour; Esmat Dastanpur; mehdi Dehghan

An Investigation of the Microstructure of Short Time Oxide Film in Al-1Mg and Al-2Mg Alloys

Volume 23, Issue 1, May 2012

10.22067/ma.v23i1.12843

S. Amir Azarmehr; mehdi Divandari; hosin Arabi

The effect of Temperature and SiC Content on the Properties and Microstructure of Foam Glasses obtained from the Wasted Cathode Ray Tube Display Panels

Volume 23, Issue 1, May 2012

10.22067/ma.v23i1.12844

mina Saiedi; S.mohamad Mirkazemi

The Use of Eddy Current Nondestructive Test for the Quality Control of arburized Components

Volume 22, Issue 2, January 2012

10.22067/ma.v22i2.10902

mehrdad kashefi; misam Shaykh Amiri; mohamad reza Ghandehari

Formation of Chromium Carbide Layer on Carburized AISI 1020 Steel by Thermal Reactive Diffusion (TRD) Technique and Evaluation of its Kinetics

Volume 22, Issue 1, January 2012

10.22067/ma.v22i1.6340

Hamid Reza Karimi Zarchi; Misam jalaly; Mansor Soltanieh

View Article

Study of the Interface Reactions between Titanium Hydride Powder (TiH2) and Pure Aluminum Melt

Volume 22, Issue 1, January 2012

10.22067/ma.v22i1.10814

ali Rasooli; mehdi Divandari; hamid reza Shahverdi; mohamad ali Boutorabi

Evaluation of Grain Size Distribution during Grain Growth in AISI 304H, 316L and 321 Austenitic Stainless Steels

Volume 22, Issue 2, January 2012

10.22067/ma.v22i2.10904

javad Rasti

A kinematical Dislocation Based Model and Admissible Velocity Field for rediction of Nanostructural Changes and Mechanical Properties of Al-Cu-Al Laminated Composite During ECAE Process

Volume 22, Issue 1, January 2012

10.22067/ma.v22i1.10815

bhzad tolami; Ali karimi taheri; mohamad Shahmiri; hosin arabi

Assessment of the Slope and Cross-Section of In-Gate on the Pressure and Flow Pattern Using Finite Volume Method

Volume 22, Issue 2, January 2012

10.22067/ma.v22i2.10905

mojtaba Brzegari; S.mohamad hosin Mirbagheri

The Effect of Temperature and Time of Infiltration Process on the Wear esistance and Properties of WC/Cu Composite

Volume 22, Issue 1, January 2012

10.22067/ma.v22i1.10816

hamid khorsand; mostafa Amirjan; hasan Abdous

Effect of Austempering Treatment on Microstructure and Mechanical Properties of D6AC Steel

Volume 22, Issue 2, January 2012

10.22067/ma.v22i2.10907

khodamorad Abbaszadeh; hasan Saghafian; shahram Kheirandish

Effect of Plasma Nitriding Temperature and Time on the Properties and Surface Morphology of H11 Hot Work Tool Steel

Volume 22, Issue 1, January 2012

10.22067/ma.v22i1.10819

hosin Aghajani; mansor Soltanieh; farzad mhboubi; khan ali Nekouee; hosin Madanipour

Study of the Influence of Chemical Composition on Miserite Formation in Glass Ceramic System SiO2-K2O-CaF2-CaO

Volume 22, Issue 2, January 2012

10.22067/ma.v22i2.10908

mohamad taghi Hamedani; vahak Marghussian; hosin SarPoolaky

Investigation on the Effect of Martensitic and Austenitic Structures on Two-Way Shape Memory Strain Value in Ni-Ti Alloys Trained under Bending

Volume 22, Issue 1, January 2012

10.22067/ma.v22i1.10821

zohre balak; s. mehdi Abasi

Journal Of Metallurgical and Materials Engineering

Journal Archive

Volume 36 (2025)

Volume 35 (2024)

Volume 34 (2023)

Volume 33 (2021-2020)

Volume 32 (2020-2021)

Volume 31 (2019-2020)

Volume 30 (2018-2019)

Volume 29 (2017-2018)

Volume 28 (2016-2017)

Volume 27 (2015-2016)

Volume 26 (2014-2015)

Volume 25 (2013-2014)

Volume 24 (2012-2013)

Volume 23 (2011-2012)

Volume 22 (2010-2011)

Volume 21 (2009-2010)