@article { author = {Ghazanfarian, Bahram and Dadashnia, Kamran and Vahdat, Seyed Ebrahim}, title = {Effect of the Content of Graphite in the Slag Powder of the Steel LRF on the Microstructure and Properties of SAW of Ductile Iron}, journal = {Journal Of Metallurgical and Materials Engineering}, volume = {32}, number = {2}, pages = {71-82}, year = {2021}, publisher = {Ferdowsi University of Mashhad Press}, issn = {2008-7462}, eissn = {2423-5881}, doi = {10.22067/jmme.2021.40015}, abstract = {The use of protective powders in submerged arc welding (SAW) is one of the methods for protecting the Welding pool. In this research, it has been attempted to use ladle refining furnaces (LRF) slag as an alternative to a ductile cast iron shielding powder. For this purpose, the hardness and maximum tensile strength of the ductile iron before and after the SAW with protective powders including from 0 to 25 wt% of graphite and 100 to 75 wt% of the LRF slag powder have been compared. The results show that the welding quality is improved by increasing the amount of graphite powder in the powder of the LRF, because the maximum tensile strength of the welded metal is nearly the maximum tensile strength of the non-welded cast iron (control specimen). Also, the amount of graphite powder in the slag powder of the LRF has the straight relation with the hardness of the welding metal.}, keywords = {Hardness,UTS,Joining,Sustainable development}, title_fa = {اثر مقدار پودر گرافیت در پودر سربارۀ کورۀ تصفیۀ پاتیلی فولاد روی ریزساختار و خواص جوش زیرپودری چدن نشکن}, abstract_fa = {استفاده از پودرهای محافظ در جوشکاری زیرپودری یکی از روش‌های محافظت از حوضچۀ جوش است، در این پژوهش، تلاش بر آن است تا از سربارۀ کورۀ پاتیلی فولاد به‌عنوان جایگزینی برای پودر محافظ جوشکاری چدن نشکن استفاده شود. به همین منظور، سختی و حداکثر استحکام کششی چدن نشکن قبل و بعد از جوشکاری زیرپودری با پودرهای محافظ حاوی صفر تا 25 درصد وزنی گرافیت و 100 تا 75 درصد وزنی پودر سربارۀ کورۀ تصفیۀ پاتیلی فولاد مقایسه شده است. نتایج حاکی از این است که با افزایش مقدار پودر گرافیت در پودر سربارۀ کورۀ تصفیۀ پاتیلی فولاد، کیفیت جوش بهتر می‌شود، زیرا حداکثر استحکام کششی فلز جوشکاری زیرپودری‌شده به حداکثر استحکام کششی چدن نشکن شاهد نزدیک‌تر می‌شود. به‌علاوه، با افزایش مقدار پودر گرافیت در پودر سربارۀ کورۀ تصفیۀ پاتیلی فولاد، سختی فلز جوشکاری زیرپودری‌شده رابطۀ مستقیم با مقدار پودر گرافیت در پودر سربارۀ کورۀ تصفیۀ پاتیلی دارد.}, keywords_fa = {سختی,حداکثر استحکام کششی,اتصال‌دهی,توسعۀ پایدار}, url = {https://jmme.um.ac.ir/article_40015.html}, eprint = {https://jmme.um.ac.ir/article_40015_3940a2f94587027c7f50e8874db5152d.pdf} }