@article { author = {ramezani, amir hoshang}, title = {Investigation of the effect of ion bombardment on the corrosion resistance of steel with argon}, journal = {Journal Of Metallurgical and Materials Engineering}, volume = {33}, number = {3}, pages = {1-10}, year = {2022}, publisher = {Ferdowsi University of Mashhad Press}, issn = {2008-7462}, eissn = {2423-5881}, doi = {10.22067/jmme.2022.77291.1057}, abstract = {The aim of this work is the study of the argon implantation on the corrosion resistance behavior of AISI 304 stainless steel substrates. The effect of ion implantation dose on morphology and corrosion properties of AISI 304 SS has been investigated.In this work, argon ions of 30 keV energy have been implanted into  AISI 304 stainless steel at different fluences ranging from to Ar/cm2.The AFM analysis of implanted samples clearly shows significant change in surface. In order to evaluate the effect of the ion bombardment on the corrosion behavior, otentiodynamic tests were performed. The results show that the corrosion resistance of the samples strongly depends on the implantation fluences.The Corrosion potential and roughness curves obviously indicate that corrosion Potential variations caused by argon ion bombardment are inversely proportional to surface roughness. Corrosion current variations show an optimal dose at ions/ cm2 in which the corrosion resistivity is 12 times higher than un-implanted sample.}, keywords = {Argon,bombardment,corrosion}, title_fa = {بررسی و مطالعه تاثیربمباران یونی در مقاومت به خوردگی استیل با آرگون}, abstract_fa = {در این پژوهش برای بمباران سطح استیل 304 از یون‌های آرگون با انرژی 30 کیلو الکترون ولت و جریان یونی 1017 تا 1018 یون بر سانتی­متر مربع‌استفاده شده است. تغییرات ریخت شناسی سطح استیل بعد از بمباران یون‌های‌آرگون توسط دستگاه AFM  مشاهده و مورد بررسی قرار گرفت، تغییر در خصوصیات خوردگی سطح استیل 304 نیز توسط دستگاه تست خوردگی انجام گردید. تغییرات بر اثر بمباران یونی در زبری سطح و همچنین مقاومت در برابر خوردگی سطح استیل 304 کاملا مشهود و قابل ملاحظه بود و رابطه مستقیمی با افزایش زبری و جریان یونی بمباران یونی دارد. از مقایسه نمودار نتایج پتانسیل خوردگی و نمودار تغییرات زبری کاملا مشخص است که پتانسیل خوردگی با جریان یونی یون‌های آرگون نسبت معکوس داشته و با بالا رفتن جریان یونی پتانسیل خوردگی کاهش می­یابد، این روند را می­توان به اثر برخورد یون‌های آرگون به سطح نسبت داد که در مقاومت در برابر خوردگی یک نکته منفی محسوب می­شود.از بررسی نمودار تغییرات جریان خوردگی به این نتیجه می­رسیم که این نمودار از هیچ کدام از نمودارهای پتانسیل خوردگی و تغییرات زبری بر حسب جریان یونی پیروی نمی­کند.از بررسی نمودار تغییرات جریان خوردگی به این نتیجه می­رسیم در جریان یونی 1017×5 حدودا دوازده برابر کاهش در جریان خوردگی و افزایش در برابر مقاومت در برابر خوردگی را نشان می­دهد.}, keywords_fa = {آرگون,بمباران یونی,خوردگی,استیل}, url = {https://jmme.um.ac.ir/article_42715.html}, eprint = {https://jmme.um.ac.ir/article_42715_c2bd2c839f0b8ed0b83f2ec07b386dbf.pdf} }