Ferdowsi University of Mashhad Press Journal Of Metallurgical and Materials Engineering 2008-7462 33 1 2022 03 21 Investigation on efficiency of analytical relations to predict the properties of reinforced nanocomposites Investigation on efficiency of analytical relations to predict the properties of reinforced nanocomposites 107 124 41550 10.22067/jmme.2021.70720.1017 FA Sina Mosalman Department of Mechanical Engineering, Urmia University, Urmia, Iran. Samrand Rash-Ahmadi Department of Mechanical Engineering, Urmia University, Urmia, Iran 0000-0002-4719-7926 Journal Article 2021 05 31 Many theoretical, micromechanical and macro mechanical models have been suggested to predict the treatment of polymer nanocomposites reinforced with different nanoparticles. Type, size and mechanical properties of base matrix and filler are the parameters which have been more important through these models. In some models, some simplifications and assumptions have been applied, so less parameters have been involved at the resultant relation. But sometimes, these simplifications caused inaccuracy in the final results. Aim of this investigation is to compare accuracy of the results of tensile tests with described models, and to suggest the most suitable model that predicts the properties of studying nanocomposite. For this Purpose, poly methyl methacrylate (PMMA) was chosen as the base matrix and TiO2, SiO2 and Al2O3 nanoparticles as reinforcements. Elastic modulus of composites indicated 7, 4 & 4% increasing rather than base material. Results obtained from the tests were compared with theoretical models. The comparisons showed that the Pan’s 3D model predicts the results with a good approximation according to experimental tests for most of samples. Many theoretical, micromechanical and macro mechanical models have been suggested to predict the treatment of polymer nanocomposites reinforced with different nanoparticles. Type, size and mechanical properties of base matrix and filler are the parameters which have been more important through these models. In some models, some simplifications and assumptions have been applied, so less parameters have been involved at the resultant relation. But sometimes, these simplifications caused inaccuracy in the final results. Aim of this investigation is to compare accuracy of the results of tensile tests with described models, and to suggest the most suitable model that predicts the properties of studying nanocomposite. For this Purpose, poly methyl methacrylate (PMMA) was chosen as the base matrix and TiO2, SiO2 and Al2O3 nanoparticles as reinforcements. Elastic modulus of composites indicated 7, 4 & 4% increasing rather than base material. Results obtained from the tests were compared with theoretical models. The comparisons showed that the Pan’s 3D model predicts the results with a good approximation according to experimental tests for most of samples. https://jmme.um.ac.ir/article_41550_d1d35acfd20d413bbda1eae8e208f0b5.pdf