1. Baghery, P., Farzam, M., Mousavi, A., and Hosseini, M., "Ni–TiO2 nanocomposite coating with high resistance to corrosion and wear," Surface and Coatings Technology, vol. 204, pp. 3804-3810,(2010).
2. Zhang, Y.-h., Ding, G.-f., Cai, Wang, H., and Cai, B., "Electroplating of low stress permalloy for MEMS," Materials characterization, vol. 57, pp. 121-126, (2006).
3. Gül, H., Kılıç, F., Aslan, S., Alp, A., and Akbulut, H., "Characteristics of electro-co-deposited Ni– Al2O3 nano-particle reinforced metal matrix composite (MMC) coatings," Wear, vol. 267, pp. 976- 990, (2009).
4. Rudnik, E., Burzyńska, L., Dolasiński, Ł., and Misiak, M., "Electrodeposition of nickel/SiC composites in the presence of cetyltrimethylammonium bromide," Applied Surface Science, vol. 256, pp. 7414-7420, (2010).
5. ZHENG, H., Maozhong, A., and Junfeng, L., "Corrosion behavior of Zn-Ni-Al2O3 composite coating," Rare Metals, vol. 25, pp. 174-178, (2006).
6. Baskaran, I., Narayanan, T. S., and Stephen, A., "Pulsed electrodeposition of nanocrystalline Cu–Ni alloy films and evaluation of their characteristic properties", Materials Letters, vol. 60, pp. 1990- 1995, (2006).
7. Yao, Y., Yao, S., Zhang, L., and Wang, H., "Electrodeposition and mechanical and corrosion resistance properties of Ni–W/SiC nanocomposite coatings", Materials Letters, vol. 61, pp. 67-70, (2007).
8. Saranya, D., Velayutham, D., and Suryanarayanan, V., "Electrodeposition of Ni–Cu alloys from a protic ionic liquid medium-voltammetric and surface morphologic studies", Journal of Electroanalytical Chemistry, vol. 734, pp. 70-78, (2014).
9. Lee, H.-K., Lee, H.-Y., and Jeon, J.-M. "Codeposition of micro-and nano-sized SiC particles in the nickel matrix composite coatings obtained by electroplating", Surface and Coatings Technology, vol. 201, pp. 4711-4717, (2007).
10. Sarac, U., Öksüzoğlu, R. M., and Baykul, M. C., "Deposition potential dependence of composition,
microstructure, and surface morphology of electrodeposited Ni–Cu alloy films", Journal of Materials
Science: Materials in Electronics, vol. 23, pp. 2110-2116, (2012).
11. Goranova, D., Avdeev, G., and Rashkov, R., "Electrodeposition and characterization of Ni–Cu alloys", Surface and Coatings Technology, vol. 240, pp. 204-210, (2014).
12. Beltowska-Lehman, E., Indyka, P., Bigos, A., Szczerba, M., Guspiel, J., Koscielny, H., et al., "Effect of current density on properties of Ni–W nanocomposite coatings reinforced with zirconia particles", Materials Chemistry and Physics, vol. 173, pp. 524-533, (2016)
13. Wang, S., Guo, X., Yang, H., Dai, J., Zhu, R., Gong, J., et al., "Electrodeposition mechanism and characterization of Ni–Cu alloy coatings from a eutectic-based ionic liquid", Applied Surface Science, vol. 288, pp. 530-536, (2014).
14. Sarac, U., and Baykul, M. C., "Morphological and microstructural properties of two-phase Ni–Cu films electrodeposited at different electrolyte temperatures," Journal of Alloys and Compounds, vol. 552, pp. 195-201, (2013).
15. Calleja, P., Esteve, J., Cojocaru, P., Magagnin, L., Valles, E., and Gomez, E., "Developing plating baths for the production of reflective Ni–Cu films", Electrochimica Acta, vol. 62, pp. 381-389, (2012).
16. Guo, C., Zuo, Y., Zhao, X., Zhao, J., and Xiong, J., "The effects of electrodeposition current density on properties of Ni–CNTs composite coatings", Surface and Coatings Technology, vol. 202, pp. 3246-3250, (2008).
17. Srinivas, P., Hamann, S., Wambach, M., Kieschnick, M., Ludwig, A., and Dey, S. R., "Development of Ni–Cu Materials Library by Using Combinatorial Pulsed Electrodeposition", Transactions of the Indian Institute of Metals, vol. 66, pp. 429-432, (2013).
18. Saha, R., and Khan, T., "Effect of applied current on the electrodeposited Ni–Al2O3 composite coatings", Surface and Coatings Technology, vol. 205, pp. 890-895, (2010).
19. Tripathi, v, and Singh, V., "Properties of electrodeposited functional Ni–Fe/AlN nanocomposite coatings," Arabian Journal of Chemistry, (2015).
20. Beltowska-Lehman, E., Indyka, P., Bigos, A., Szczerba, M., Guspiel, J., Koscielny, H., et al., "Effect of current density on properties of Ni–W nanocomposite coatings reinforced with zirconia particles", Materials Chemistry and Physics, vol. 173, pp. 524-533, (2016).
21. Gyawali, G., Cho, S. H., and Lee, S. W., "Electrodeposition and characterization of Ni-TiB2 composite coatings", Metals and Materials International, vol. 19, pp. 113-118, (2013).
22. Tamilarasan, T., Rajendran, R., Rajagopal, G., and Sudagar, J., "Effect of surfactants on the coating properties and corrosion behaviour of Ni–P–nano-TiO2 coatings," Surface and Coatings Technology, vol. 276, pp. 320-326, (2015).
23. Vazquez-Gomez, L., Cattarin, S., Guerriero, P., and Musiani, M., "Influence of deposition current density on the composition and properties of electrodeposited Ni+RuO2 and Ni+IrO2 composites", Journal of Electroanalytical Chemistry, vol. 634, pp. 42-48, (2009).
24. Haciismailoglu, M., and Alper, M., "Effect of electrolyte pH and Cu concentration on microstructure of electrodeposited Ni–Cu alloy films", Surface and Coatings Technology, vol. 206, pp. 1430-1438, (2011).
25. Hou, F., Wang, W., and Guo, H., "Effect of the dispersibility of ZrO2 nanoparticles in Ni–ZrO2 electroplated nanocomposite coatings on the mechanical properties of nanocomposite coatings", Applied Surface Science, vol. 252, pp. 3812-3817, (2006).
26. Goldasteh, H., and Rastegari, S., "The influence of pulse plating parameters on structure and properties of Ni–W–TiO2 nanocomposite coatings", Surface and Coatings Technology, vol. 259, pp. 393-400, (2014).
27. Pavlatou, E., Stroumbouli, M., Gyftou, P., and Spyrellis, N., "Hardening effect induced by incorporation of SiC particles in nickel electrodeposits", Journal of Applied Electrochemistry, vol. 36, pp. 385-394, (2006).
28. Wang, Y., Zhou, Q., Li, K., Zhong, Q., and Bui, Q. B., "Preparation of Ni–W–SiO2 nanocomposite coating and evaluation of its hardness and corrosion resistance", Ceramics International, vol. 41, pp. 79-84, (2015).
29. Lajevardi, S., and Shahrabi, T., "Effects of pulse electrodeposition parameters on the properties of Ni–TiO2 nanocomposite coatings", Applied Surface Science, vol. 256, pp. 6775-6781,(2010).
30. Allahyarzadeh, M., Aliofkhazraei, M., Rouhaghdam, A. S., and Torabinejad, V., "Electrodeposition of Ni–W–Al2O3 nanocomposite coating with functionally graded microstructure", Journal of Alloys and Compounds, vol.666, pp. 217-226, (2016).
31. Shakoor, R., Kahraman, R., Waware, U., Wang, Y., and Gao, W., "Properties of electrodeposited Ni– B–Al2O3 composite coatings", Materials & Design, vol. 64, pp. 127-135, (2014).
32. Bakhit, B., Akbari, A., Nasirpouri, F., and Hosseini, M. G., "Corrosion resistance of Ni–Co alloy and Ni–Co/SiC nanocomposite coatings electrodeposited by sediment codeposition technique", Applied Surface Science, vol. 307, pp. 351-359, (2014).
33. Ghosh, S., Dey, G., Dusane, R., and Grover, A., "Improved pitting corrosion behaviour of electrodeposited nanocrystalline Ni–Cu alloys in 3.0 wt.% NaCl solution", Journal of alloys and compounds, vol. 426, pp. 235-243, (2006).
34. Huang, P.-C., Hou, K.-H., Wang, G.-L., Chen, M.-L., and Wang, J.-R., "Corrosion Resistance of the Ni-Mo Alloy Coatings Related to Coating's Electroplating Parameters", International Journal of Electrochemical Science, vol. 10, pp. 4972-4984, (2015).
)
ارسال نظر در مورد این مقاله