Novel High-Cycle-Life Soft Actuator Using Silicon Elastomer Matrix and Ethanol

Document Type : Original Articles

Authors

1 Department of electronic engineering, ferdowsi university of mashhad, mashhad, iran

2 Department of materials and metallurgy engineering, ferdowsi university of mashhad, mashhad, iran

3 Electrical Engineering Department, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

Abstract

The application of conventional actuators such as hydraulic and pneumatic motors and artificial muscles is limited in many areas due to their heavy weight, large dimensions, and excessive noise. In recent years, many researchers and scientists have conducted extensive research to introduce a new generation of smart, inexpensive, small, and lightweight operators. In this research, a soft robot with a fast response, using a polymer composite with silicon matrix and ethanol as a phase-changing fluid (secondary phase), was made. Its kinetic behavior and temperature response under several periods and working cycles were investigated. Due to the electrical actuation and the internal pressure created inside the microcapsules containing ethanol, which are randomly distributed in the composite matrix, at the ethanol phase change's temperature, the mechanical force required to move the soft robot is provided. The evaluation of soft robot dynamic operation showed optimal response on the first and second working days (8.55 and 6.2mm of displacement, respectively). Also, the external and internal temperature of the composite indicates the temperature stability of the material, which respectively reached a maximum of 48 and 81°C. Also, at the end of the actuation period on the seventh day, the material had about 11% weight reduction due to ethanol loss, which indicates the desirable performance of the composite in terms of storage and retention of the phase-changing fluid.

Keywords


  1. Hülse, M., Wischmann, S., & Pasemann, F., "The role of non-linearity for evolved multifunctional robot behavior", In International Conference on Evolvable Systems, pp. 108-118, Springer, Berlin, Heidelberg, September, (2005).
  2. Trivedi, D., Rahn, C. D., Kier, W. M., & Walker, I. D., "Soft robotics: Biological inspiration, state of the art, and future research", Applied bionics and biomechanics, 5, NO. 3, pp. 99-117, (2008).
  3. Laschi, C., & Cianchetti, M., "Soft robotics: new perspectives for robot bodyware and control", Frontiers in bioengineering and biotechnology, Vol. 2, (2014).
  4. Rus, D., & Tolley, M. T., "Design, fabrication and control of soft robots", Nature, 521, NO. 7553, pp. 467-475, (2015).
  5. Case, J. C., White, E. L., & Kramer, R. K., "Soft material characterization for robotic applications", Soft Robotics, 2, NO. 2, pp. 80-87, (2015).
  6. Ilievski, F., Mazzeo, A. D., Shepherd, R. F., Chen, X., & Whitesides, G. M., "Soft robotics for chemists", Angewandte Chemie, 123, NO. 8, pp. 1930-1935, (2011).
  7. Seok, S., Onal, C. D., Cho, K. J., Wood, R. J., Rus, D., & Kim, S., "Meshworm: a peristaltic soft robot with antagonistic nickel titanium coil actuators", IEEE/ASME Transactions on mechatronics, 18, NO 5, pp. 1485-1497, (2012).
  8. Lin, H. T., Leisk, G. G., & Trimmer, B., "GoQBot: a caterpillar-inspired soft-bodied rolling robot", Bioinspiration & biomimetics, 6, NO. 2, (2011).
  9. Laschi, C., Cianchetti, M., Mazzolai, B., Margheri, L., Follador, M., & Dario, P., "Soft robot arm inspired by the octopus", Advanced robotics, 26, NO. 7, pp. 709-727, (2012).
  10. Lee, C., Kim, M., Kim, Y. J., Hong, N., Ryu, S., Kim, H. J., & Kim, S., "Soft robot review", International Journal of Control, Automation and Systems, 15, NO.1, pp. 3-15, (2017).
  11. Chen, F. J., Dirven, S., Xu, W. L., & Li, X. N., "Soft actuator mimicking human esophageal peristalsis for a swallowing robot", IEEE/ASME Transactions on Mechatronics, 19, NO. 4, pp. 1300-1308, (2013).
  12. Renda, F., Cianchetti, M., Giorelli, M., Arienti, A., & Laschi, C. "A 3D steady-state model of a tendon-driven continuum soft manipulator inspired by the octopus arm", Bioinspiration & biomimetics, 7, NO.2, (2012).
  13. Cianchetti, M., Ranzani, T., Gerboni, G., Nanayakkara, T., Althoefer, K., Dasgupta, P., & Menciassi, A., "Soft robotics technologies to address shortcomings in today's minimally invasive surgery: the STIFF-FLOP approach", Soft robotics, 1, NO.2, pp. 122-131, (2014).
  14. Deimel, R., & Brock, O., "A novel type of compliant and underactuated robotic hand for dexterous grasping", The International Journal of Robotics Research, 35, NO. 1-3, pp. 161-185, (2016).
  15. Ilievski, F., Mazzeo, A. D., Shepherd, R. F., Chen, X., & Whitesides, G. M., "Titelbild: Soft robotics for chemists (angew. chem. 8/2011)", Angewandte Chemie, 123, NO. 8, pp. 1765-1765, (2011).
  16. Mirfakhrai, T., Madden, J. D., & Baughman, R. H., "Polymer artificial muscles", Materials today, 10, NO. 4, pp. 30-38, (2007).
  17. Katzschmann, R. K., Marchese, A. D., & Rus, D., "Hydraulic autonomous soft robotic fish for 3D swimming", In Experimental Robotics, pp. 405-420, Springer, Cham, (2016).
  18. Polygerinos, P., Wang, Z., Galloway, K. C., Wood, R. J., & Walsh, C. J., "Soft robotic glove for combined assistance and at-home rehabilitation", Robotics and Autonomous Systems, 73, pp. 135-143, (2015).
  19. Otero, T. F., & Sansieña, J. M., "Soft and wet conducting polymers for artificial muscles", Advanced Materials, 10, NO. 6, pp. 491-494, (1998).
  20. Miriyev, A., Stack, K., & Lipson, H., "Soft material for soft actuators", Nature communications, 8, NO. 1, pp. 1-8, (2017).
  21. Miriyev, A., Xia, B., Joseph, J. C., & Lipson, H., "Additive manufacturing of silicone composites for soft actuation", 3D Printing and Additive Manufacturing, 6, NO. 6, pp. 309-318, (2019).
  22. Miriyev, A., Trujillo, C., Caires, G., & Lipson, H., "Rejuvenation of soft material–actuator", MRS Communications, 8, NO. 2, pp. 556-561, (2018).
  23. Cui, H., Zhao, Q., Wang, Y., & Du, X., "Bioinspired actuators based on stimuli‐responsive polymers", Chemistry–An Asian Journal, 14, NO. 14, pp. 2369-2387, (2019).
  24. Haines, C. S., Lima, M. D., Li, N., Spinks, G. M., Foroughi, J., Madden, J. D., ... & Baughman, R. H., "Artificial muscles from fishing line and sewing thread", science, 343, NO. 6173, pp. 868-872, (2014).
  25. Hu, W., Lum, G. Z., Mastrangeli, M., & Sitti, M., "Small-scale soft-bodied robot with multimodal locomotion", Nature, 554, NO. 7690, pp. 81-85, (2018).
  26. Lipton, J. I., Angle, S., Banai, R. E., Peretz, E., & Lipson, H., "Electrically actuated hydraulic solids", Advanced Engineering Materials, 18, NO. 10, pp. 1710-1715, (2016).
  27. Zamyad, H., & Naghavi, N., "Behavior identification of IPMC actuators using Laguerre-MLP network with consideration of ambient temperature and humidity effects on their performance", IEEE Transactions on Instrumentation and Measurement, 67, NO.11, pp. 2723-2732, (2018).
  28. Mirvakili, S. M., & Hunter, I. W., "Artificial muscles: Mechanisms, applications, and challenges", Advanced Materials, 30, NO.6, 1704407, (2018).

 

CAPTCHA Image