Gelatin-Calcium Phosphate Composite Scaffold: From Fabrication to Mechanical and Biological Properties Investigation

Document Type : Original Articles

Authors

• Faezeh Darvishian Haghighi ¹
• Sahar Moaveni ²
• sahar mollazadeh ¹
• samane sahebian ¹
• Zahra Tayarani Najaran ²

¹ Department of Material Science and Engineering, Ferdowsi University of Mashhad, Mashhad, Iran.

² Pharmacological Research Center of Medicinal Plants, University of Medical Sciences, Mashhad, Iran

10.22067/jmme.2022.71323.1019

Abstract

The fabrication of the most similar structure to the bone with appropriate mechanical, physical, and biological characteristics is challenging. The main aim of the present research is to design, fabricate, and characterize the gelatin-calcium phosphate composite scaffolds. First, calcium phosphate particles (SCP) were synthesized through the sol-gel process. Accordingly, the prepared particles were synthesized via the sol-gel route and heat-treated at 1100℃. Then, the gelatin-calcium phosphate composite scaffolds were fabricated through solvent casting and freeze-drying methods. According to the pycnometer and particle size (PSA) analyses, the density and the particle size of the SCP particles were 4.06 g/cm3 and 37±5 nm, respectively. Based on the XRD and DTA-TG results of the particles, crystallization of the calcium phosphate phases has been started at 800℃. The functional groups of the particles have been also studied through FTIR analysis. The roughness of the particles was 17.32nm based on the AFM microscopy results. According to the three-point flexural test, the final strength of the scaffolds was 15 MPa. Field emission scanning electron microscopy (FESEM) showed that the scaffolds had a completely porous structure with interconnected pores. Resazurin Red Assay confirmed the viability of 78% of stem cells on the scaffolds after 5 days of seeding. Immersion of the scaffolds in the simulated body fluid (SBF) caused the controlled release of the Ca2+, Si4+, and PO43- ions. Altogether, the gelatin-calcium phosphate composite scaffolds have a promising role in tissue engineering applications.

Keywords

• Bone Scaffold
• Gelatin
• Calcium phosphate
• Stem Cell Culture
• Mechanical and Biological Properties

Main Subjects

• Biomaterials

---

References

1. Kanhed, S., Awasthi, S., Goel, S., Pandey, A., Sharma, R., Upadhyaya, R., Balani, K., "Porosity distribution affecting mechanical and biological behaviour of hydroxyapatite bioceramic composites", Ceraimcs International. 43, pp. 10442–10449, (2017).
2. Kuttappan, S., Mathew, D., Nair, M. B., "Biomimetic composite scaffolds containing bioceramics and collagen/gelatin for bone tissue engineering - A mini review", International Journal of Biological Macromole. 93, pp. 1390–1401, (2016).
3. Rizwan, M. Hamdi, W.J. Basirun, K. Kondoh, J. Umeda, Low pressure spark plasma sintered hydroxyapatite and Bioglass® composite scaffolds for bone tissue repair, Ceramics International, Vol. 44, pp. 23052–23062, (2018).
4. Kaur, G., Kumar, V., Baino, F., Mauro, J. C., Pickrell, G., Evans, I., Bretcanu, O., "(Mechanical properties of bioactive glasses, ceramics, glass-ceramics and composites: State-of-the-art review and future challenges", Material Science and engineering C, pp. 109895, (2019).
5. Fayyazbakhsh, F., Solati-Hashjin, M., Keshtkar, A., Shokrgozar, M. A., Dehghan, M. M., Larijani, B., "Novel layered double hydroxides-hydroxyapatite/gelatin bone tissue engineering scaffolds: Fabrication, characterization, and in vivo study", Material Science and engineering C. Vol. 76, pp. 701–714, (2017).
6. Palmero, P., "Ceramic-Polymer Nanocomposites for Bone-Tissue Regeneration", Journal of Nanocomposites for Musculoskeletal Tissue Regeneration, Elsevier Ltd, pp. 331-367 (2016).
7. Fayyazbakhsh, F., Solati-Hashjin, M., Shokrgozar, M. A., Bonakdar, S., Ganji, Y., Mirjordavi, N., Ghavimi, S. A., Khashayar, P., "Biological Evaluation of a Novel Tissue Engineering Scaffold of Layered Double Hydroxides (LDHs)", Key Engineering Materials, pp. 493–494, 902, (2011).
8. Huh, J. T., Lee, J. U., Kim, W. J., Yeo, M., Kim, G. H., "Preparation and characterization of gelatin/α-TCP/SF biocomposite scaffold for bone tissue regeneration", International Journal of Biological Macromolcules. 110, pp. 488–496, (2018).
9. Feng, S., He, F., Ye, J., "Hierarchically porous structure, mechanical strength and cell biological behaviors of calcium phosphate composite scaffolds prepared by combination of extrusion and porogen burnout technique and enhanced by gelatin", Material Science and Engineering C,. 82, pp. 217–224, (2018).
10. Bakhtiari, L., Reza, H., Mohamad, S., Ali, M., "Investigation of biphasic calcium phosphate / gelatin nanocomposite scaffolds as a bone tissue engineering", Ceramics International, 36, pp. 2421–2426, (2010).
11. Narbat, M. K., Orang, F., Hashtjin, M. S., Goudarzi, A., "Fabrication of Porous Hydroxyapatite-Gelatin Composite Scaffolds for Bone Tissue Engineering", Iranian Biomedical Journal, 10, No.4, Pp. 215–223, (2006).
12. Luo, Yi and Wang, Zhendong and Jin, Shaoqing and Zhang, Bin and Sun, Hongmin and Yuan, Xiaohong and Yang, Weimin, "Synthesis and crystal growth mechanism of ZSM-22 zeolite nanosheets", Journal of CrystEngComm, 18, Issue. 30, pp. 5611-5615 (2016).
13. Ghorbani, F., Nojehdehian, H., Zamanian, A., "Physicochemical and mechanical properties of freeze cast hydroxyapatite-gelatin scaffolds with dexamethasone loaded PLGA microspheres for hard tissue engineering applications", Material Science and Engineering C. 69, pp. 208–220, (2016).
14. Azadeh Motealleh, Siamak Eqtesadi, Fidel Hugo Perera, Antonia Pajares, Fernando Guiberteau, Pedro Miranda,

Understanding the role of dip-coating process parameters in the mechanical performance of polymer-coated bioglass robocast scaffolds, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 64, pp. 253-261, (2016).

15. , Catauro, A. Dell’Era, S., Vecchio Ciprioti, "Synthesis, structural, spectroscopic and thermoanalytical study of sol-gel derived SiO₂-CaO-P₂O₅ gel and ceramic materials", Thermochimica Acta. Vol. 625, Pp. 20–27, (2016).
16. Taherkhani, S., Moztarzadeh, F., Mozafari, M., Lot, N., "Sol – gel synthesis and characterization of unexpected rod-like crystal fi bers based on", Vol. 358, 342–348, (2012).
17. Abdelghany, A.M., ElBatal, H.A., Okasha, A. et al. Compatibility and Bone Bonding Efficiency of Gamma Irradiated Hench’s Bioglass. Journal of Silicon, 10, pp. 1533–1541, (2018).
18. Nabian, N., Jahanshahi, M., Mahmood, S., "Synthesis of nano-bioactive glass – ceramic powders and its in vitro bioactivity study in bovine serum albumin protein", Journal of Molecular Structure, 998, pp. 37–41, (2011).
19. Faure, J., Drevet, R., Lemelle, A., Ben Jaber, N., Tara, A., El Btaouri, H., Benhayoune, H., "A new sol – gel synthesis of 45S5 bioactive glass using an organic acid as catalyst Preparation of Powder Gel", Material science and engineering C, 47, pp. 407–412, (2015).
20. Rubio, F., Rubio, J., Oteo, J. L., A FT-IR Study of the Hydrolysis of Tetraethylorthosilicate (TEOS), Journal of Spectroscopy Letters, Vol. 31, pp. 199-219, (1998).
21. Darvishian Haghighi, F., Mollazadeh Beidokhti, S., Tayarani Najaran, Z., Sahebian Saghi, S., "Highly improved biological and mechanical features of bioglass-ceramic/ gelatin composite scaffolds using a novel silica coverage", Ceramics International, 47, Issue 10, Part A, pp.14048-14061, (2021).
22. Darvishian Haghighi, F., Mollazadeh Beidokhti, S., Sahebian Saghi, S., Tayarani Najaran, Z., "Effect of manufacturing route on microstructure and mechanical properties of calcium phosphate/gelatin-starch composite scaffold", Journal of Metallurgical engineering, Vol. 22, Issue. 2, 84-95, (2019), (In Persion).