The effect of carbon black content on the weld strength of friction stir spot aluminum/polyethylene composite weld

Document Type : Original Articles

Authors

toktam kianafshar ¹

samane sahebian ²

mohsen haddad sabzevar ¹

¹ Department of Material Science and Engineering, Ferdowsi University of Mashhad

² Department of Material science and Engineering, Ferdowsi University of Mashhad, Mashhad, Iran.

10.22067/jmme.2022.76096.1048

Abstract

With the emergence of industries and their growth, joining different parts to each other has become an important need. Due to the complexity of conventional connection methods, there has been a great deal of interest in research and development of new connection methods in recent years. Therefore, this study was conducted to investigate the joining strength of 5083 aluminum alloy to a polymer-based composite reinforced with carbon black particles. In this study, mechanical properties including shear tensile strength and the effect of reinforcing particles on the thermal conductivity of high density polyethylene were investigated. In this study, the joining was performed by friction stir welding process and the weld point strength was investigated by shear tensile test. Percentage of reinforcing phase added to the polyethylene matrix, dwell time of friction stir spot welding machine tools as variables affecting the shear tensile strength were evaluated in this study. The results showed that by increasing the dwell time for pure polyethylene for 15 seconds and for composite samples of carbon black reinforced polyethylene in a time period of 10 seconds, a favorable bond was established and with increasing dwell time Up to 20 seconds due to excessive increase of polyethylene melt strength and residual stresses during the freezing process, a decreasing trend of bond strength was observed.

Keywords

Friction stir spot welding

high density polyethylene

carbon black

shear tensile strength

20.1001.1.20087462.1401.33.2.9.9

Subjects

• Welding

---

References

1. 1.       Moshwan, R., Rahmat, S., Yusof, F., Hassan, M., Hamdi, M. and Fadzil, M., "Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy", Materials Research, Vol.106, No. 3, pp. 258-266, (2015).

   2.       Khodabakhshi, F., Haghshenas, M., Sahraeinejad, S., Chen, J., Shalchi, B., Li, J., "Microstructure-property characterization of a friction-stir welded joint between AA5059 aluminum alloy and high-density polyethylene", Materials Characterization, Vol. 98, pp.73-82, (2014).

   3.       Liu, F.C., Liao, J. and Nakata, K., "Joining of metal to plastic using friction lap welding",  Materials and Design, Vol. 54, pp. 236-244, (2014).

   4.       Formela, K., Kuranska, M. and Barczewski, M., "Recent Advances in Development of Waste-Based Polymer Materials", Polymers, Vol. 14, No. 5, p.1050, (2022).

   5.       Hsissou, R., Seghiri, R., Benzekri, Z., Hilali, M., Rafik, M. and Elhafi, A., "Polymer composite materials: A comprehensive review", Composite Structures, Vol. 262, p. 113640, (2021).

   6.       Arefin, A. M. E., Khatri, N. R., Kulkarni, N. and Egan, P. F., "Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications", Polymers, Vol. 13, No. 9, p. 1499, (2021).

   7.       Formela, K., Zedler, L., Hejna, A. and Tercjak, A., "Reactive extrusion of bio-based polymer blends and composites – Current trends and future developments", Express Polymer Letters, Vol. 12, No.1, pp. 24-57, (2018).

   8.       Wong, K. and Abbas Jawad, Z., "A review and future prospect of polymer blend mixed matrix membrane for CO₂ separation", Polymer Research, Vol. 26, No. 12, pp. 1-18, (2019).

   9.       Roy, K., Debnath, S. C. and potiyaraj, P., "A Review on Recent Trends and Future Prospects of Lignin Based Green Rubber Composites",  Polymers and the Environment, Vol.28, No. 2, pp. 367-387, (2020). 

   10.   Karami Pabandi, H., Movahedi, H., Kokabi, A. H., "A New Refill Friction Spot Welding Process for Aluminum/Polymer Composite Hybrid Structures", Composites Structures, Vol. 174, pp. 59-69, (2017).

   11.   Yousefpour, A., Hojjati, M. and Immarigeon, J. P., "Fusion Bonding/Welding of Thermoplastic Composites", Thermoplastic Composite Materials, Vol. 17, No. 4, pp. 303-341, (2004).

   12.   Mishra, R. S. and Ma, Z. Y., "Friction stir welding and processing", Materials Science and Engineering, Vo1. 50, No. 1-2, pp. 1-78, (2005).

   13.   Yang, X. W., Fu, T. and Li, W. Y., "Friction Stir Spot Welding: A Review on Joint Macro and Microstructure, Property, and Process Modelling", Advances in Materials Science and Engineering, Vol. 2014, p. 11, (2014).

   14.   Aghajani Derazkola, H., Kashiry Fard, R. and Khodabakhshi, F., "Effects of processing parameters on the characteristics of dissimilar friction-stir-welded joints between AA5058 aluminum alloy and PMMA polymer", welding in world, Vol. 62, No. 1, pp. 117-130, (2018).

   15.   Kemal Bilici, M. and Irfan Yukler, A., "Effects of welding parameters on friction stir spot welding of high density polyethylene sheets", Materials & Design, Vol. 33, pp. 545-550, (2012).

   16.   Ratanathavorn, W. and Melander, A., "Dissimilar joining between aluminium alloy (AA 6111) and thermoplastics using friction stir welding", Science and Technology of Welding and Joining, Vol. 20, pp. 222-228, (2015).

   17.   Shahmiri, H., Movahedi, M. and Kokabi, A.M., "Friction stir lap joining o aluminum alloy to polypropylene sheets", Science and Technology of Welding and  Joining, Vol. 22, No. 2, pp. 20-126, (2017).

   18.  

   Lionetto, F., Balle, F., Maffezzoli, A., "Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites", Materials Processing Technology, Vol. 247, pp. 289-295, (2017).

   19. Ogawa, Y., Xiong, Y., Akebono, H., Kato, M., Tanaka, K. and Sugeta, A., "Fatigue properties of friction stir welds of treated Al to carbon fibre- reinforced Plastic", Science and Technology of Welding and Joining, Vol. 23, No. 1, pp. 79-86, (2018).
   20. Aghajani Derazkola, H., and Simchi, A. R., "An investigation on the dissimilar friction stir welding of T-joints between AA5754 aluminum alloy and poly(methyl methacrylate)", Thin-Walled structures, Vol. 135, pp. 376-384, (2019).
   21. Amancio-Filho, S. T., Bueno, C., Santos, J. F., Huber, N. and Hage Jr, E., "On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures", Materials Science and Engineering, Vol. 528, No. 10-11, pp. 3841-3848, (2011).