Investigation of the effect of copper addition on the phase equilibrium and the microstructure of 410s stainless steel

Document Type : Original Articles

Author

Mehdi Bahmani oskooee

Materials Science Department / Urmia University of Technology

10.22067/jmme.2022.75465.1041

Abstract

In this study, the effect of copper addition on the microstructure of the 410s stainless steel was investigated by means of scanning electron microscopy which was equipped with energy dispersive X-ray spectroscopy (EDS). Also the phase equilibria and the phase fractions at 1000℃ were calculated using the software package MatCalc version 6.00. The samples were solution annealed at 1000℃ and quenched in oil. According to the results of thermodynamic calculations and scanning electron microscopy images, dual-phase steel with microstructure including ferrite and martensite was formed. It was found that by increasing the amount of copper in the chemical composition of steel, the weight fraction of the ferrite phase in the microstructure decreases remarkably. The phase fraction of ferrite decreases with increasing copper content in agreement with the thermodynamic calculations. The addition of about 5 wt.% copper eliminated the ferrite phase and led to a fully martensite microstructure in the quenched samples.

Keywords

stainless steel

martensite

copper

dual-phase microstructure

thermodynamic calculation

20.1001.1.20087462.1401.33.2.12.2

Subjects

• Physical Metallurgy

---

References

1. Hong, T., and Koo, C. H., "Antibacterial properties, corrosion resistance and mechanical properties of Cu-modified SUS 304 stainless steel", Materials Science and Engineering: A, 393, No. 1–2, pp. 213–222, (2005).
2. Ren, L., Nan, L., and Yang, K., "Study of copper precipitation behavior in a Cu-bearing austenitic antibacterial stainless steel", Materials and Design, 32, No. 4, pp. 2374–2379, (2011).
3. Nan, L., Yang, W., Liu, Y., Xu, H., and Li, Y., "Antibacterial mechanism of copper-bearing antibacterial stainless steel against E. coli", Journal of Materials Science and Technology, 24, No. 2, pp. 197–201, (2008).
4. Nan, L., and Yang, K., "Cu Ions Dissolution from Cu-bearing Antibacterial Stainless Steel", Journal of Materials Science and Technology, 26, No. 10, pp. 941–944, (2010).
5. Boniardi, M. V., and Casaroli, A., "Stainless Steels", Brescia: Lucefin, (2014).
6. Niinomi, M., "Recent metallic materials for biomedical applications", Metallurgical and Materials Transactions A., 33, No. 3, pp. 477–486, (2002).
7. Lo, K. H., Shek, C. H., and Lai, J. K. L., "Recent developments in stainless steels", Materials Science & Engineering R: Reports, Vol. 65, pp. 39–104, (2009).
8. Ivanova, E. P., Bazaka, K., and Crawford, R. J., "Metallic biomaterials: types and advanced applications", New functional biomaterials for medicine and healthcare, woodhead, pp. 121–147, (2014).
9. Winters, G. L., and Nutt, M. J., "Stainless Steels for Medical and Surgical Applications", ASTM International, (2003).
10. Baena, M. I., Márquez, M. C., Matres, V., Botella, J., and Ventosa, A., "Bactericidal activity of copper and niobium-alloyed austenitic stainless steel", Current Microbiology, Vol. 53, No. 6, pp. 491–495, (2006).
11. Maalekian, M., "The Effects of Alloying Elements on Steels", Technical University of Graz, (2007).
12. Kozeschnik, E., "Thermodynamic prediction of the equilibrium chemical composition of critical nuclei: Bcc Cu precipitation in α-Fe", Scripta Materialia, 59, No. 9, pp. 1018–1021, (2008).
13. Stechauner, G., and Kozeschnik, E., "Thermo-kinetic modeling of Cu precipitation in α-Fe", Acta Materialia, 100, pp. 135–146, (2015).
14. Mayr, P., Palmer, T. A., Elmer, J. W., Specht, E. D., and Allen, S. M., "Formation of delta ferrite in 9 wt .% Cr steel investigated by in-situ X-ray diffraction using synchrotron radiation", Metallurgical and Materials Transactions A, 41, No. 10, pp. 2462–2465, (2010).
15. Sha, W., Leitner, H., Guo, Z., and Xu, W., "Phase transformations in maraging steels", Phase Transform. Steels, 2, pp. 332–362, (2012).
16. Hou, Z., "Study of precipitation in martensitic Fe-C-Cr alloys during tempering : Experiments and modelling", Royal Institute of Technology, (2015).
17. Isik, M. I., Kostka, A., Yardley, V. A., Pradeep, K. G., Duarte, M. J., Choi, P. P., Raabe, D., and Eggeler, G., "The nucleation of Mo-rich Laves phase particles adjacent to M23C6 micrograin boundary carbides in 12% Cr tempered martensite ferritic steels", Acta Materialia, 90, pp. 94–104, (2015).
18. Povoden-Karadeniz, E., "Thermodynamic database mc_fe.tdb, Version 2.058. ", TU Wien, (2016)
19. Chakraborty, G., Das, C. R., Albert, S. K., Bhaduri, A. K., Paul, V. T., Panneerselvam, G., and Dasgupta, A., "Study on tempering behaviour of AISI 410 stainless steel", Materials Characterization, 100, pp. 81–87, (2015).
20. Maalekian, "The Effects of Alloying Elements on Steels", Technical University of Graz, (2007).
21. Martins, M., and Cerqueira, P. E. C., "Characterisation of ASTM A747-grade CB7Cu-1 precipitation hardening cast stainless steel", International Journal of Cast Metals Research, 25, No. 2, pp. 121–125, (2012).
22. Ran, Q., Li, J., Xu, Y., Xiao, X., Yu, H., and Jiang, L., "Novel Cu-bearing economical 21Cr duplex stainless steels", Materials and Design, 46, pp. 758–765, (2013).