Effect of Cooling Rate and H2 Gas on the Inter-Dendritic Distance and Mechanical Properties of Composite

Mirbagheri, S. Mohamad Hosin; Majidian, Maryam

doi:10.22067/ma.v21i1.2425

Effect of Cooling Rate and H2 Gas on the Inter-Dendritic Distance and Mechanical Properties of Composite

Document Type : Original Articles

Authors

S. mohamad hosin mirbagheri

maryam Majidian

10.22067/ma.v21i1.2425

Abstract

In this paper, effect of cooling rate on dendrite arm space, porosities density and mechanical properties of composite has been investigated during degassing with H2. For this purpose a wedge sample was designed, and then the composite was cast under two degassing conditions: i. 100%Ar, ii. . Before pouring, some thermocouples were placed into the wedge. Then thermal history of the wedge was saved in a computer using a data acquisition system which connected to the thermocouples. Then hardness and stiffness tests were conducted on the wedge. Finally, microstructures of the composites were investigated and relations between mechanical properties and cooling rate of composites were extracted. In the case of , results show effect of the micro-porosities on the mechanical properties will be omitted when the cooling rate controlled between
2-2.5

Send comment about this article

Name *

Enter Name.

Email Address *

Enter a valid email address.

Affiliation *

Enter a vaid affiliation.

Comments *

Enter comments (At leaset 10 words)

Security Code *