The Effect of Different Amounts of ZnO on Structural Properties of Aluminosilicate Glasses

Kahrobaee, Zahra; Azghandirad, Sajad; NaeemAbadi, Javad; Tavakolian Akbari, Masoud; Mollazadeh, Sahar; Mazinani, Mohammad

doi:10.22067/jmme.2020.39262

The Effect of Different Amounts of ZnO on Structural Properties of Aluminosilicate Glasses

Document Type : Original Articles

Authors

Zahra Kahrobaee ¹

Sajad Azghandirad ²

Javad NaeemAbadi ³

Masoud Tavakolian Akbari ³

Sahar Mollazadeh ³

Mohammad Mazinani ¹

¹ Department of Materials Engineering, Faculty of Engineering, Ferdowsi University Of Mashhad.

² Student, Department of Materials Engineering, Faculty of Engineering, Ferdowsi University of Mashhad

³ Department of Materials Engineering, Faculty of Engineering, Ferdowsi University of Mashhad.

10.22067/jmme.2020.39262

Abstract

The effect of different amounts of ZnO on structural properties of SiO₂-Al₂O₃-p < sub>2O₅-CaF₂-CaO-K₂O-Na₂O-xZnOglasses was studied. The effect of ZnO addition on glass transition and crystallization temperatures were studied by DTA. FTIR and RAMAN were used to study the characteristic bands of prepared glasses. All samples were heat treated at two different temperatures of 750 and 1100°C. XRD analysis showed that anorthite and calciumphosphate were the main crystalline phases. Based on DTA and XRD results, samples with higher amounts of ZnO were crystallized at higher temperatures. No significant band changes were detected as a result of ZnOaddition as spectroscopic results showed. Vickers microhardness numbers showed that ZnO addition up to 2gr lead to a significant (p < 0.05) improvement in microhardness values.

Keywords

Glass-ceramic

Zinc Oxid

Heat-treatment

Micro-hardness

S. Shorvazi, F. Kermani, S. Mollazadeh, A. Kiani-Rashid, S. Kargozar, and A. Youssefi, “Coating Ti6Al4V substrate with the triple-layer glass-ceramic compositions using sol–gel method; the critical effect of the composition of the layers on the mechanical and in vitro biological performance,” J. Sol-Gel Sci. Technol., Vol. 94, pp. 743–753, (2020).
F. Darvishian, S. Mollazadeh, and Z. Tayarani, “Highly improved biological and mechanical features of bioglass-ceramic / gelatin composite scaffolds using a novel silica coverage,” Ceram. Int., Vol. 47, pp. 14048–14061, (2021).
Smedskjaer, Morten M., Randall E. Youngman, and John C. Mauro., "Impact of ZnO on the structure and properties of sodium aluminosilicate glasses: Comparison with alkaline earth oxides." Journal of Non-Crystalline Solids, Vol. 381, pp. 58-64, (2013).
S. Mollazadeh, B. Eftekhari Yekta, J. Javadpour, A. Yusefi, and T. S. Jafarzadeh, “The role of TiO₂, ZrO₂, BaO and SiO₂ on the mechanical properties and crystallization behavior of fluorapatite-mullite glass-ceramics,” J. Non. Cryst. Solids, Vol. 361, pp. 70–77, (2013).
S. Mollazadeh, J. Javadpour, B. E. Yekta, T. S. Jafarzadeh, and A. Youssefi, “Synthesis and characterisation of dental composite materials reinforced with fluoroapatite-mullite glass-ceramic particles,” Adv. Appl. Ceram., Vol. 112, pp. 294–300, (2013).
Armstrong, S., et al., "Adhesion to tooth structure: a critical review of "micro" bond strength test methods". Dental Materials, Vol. 26(2), pp. 50-62, (2010).
Bayne, S. C., et al., "Sturdevant's art and science of operative dentistry". Chaper, Vol. 7, pp. 307-44, (2006).
Wood, D., and Hill, R., "Glass ceramic approach to controlling the properties of a glass-ionomer bone cement". Biomaterials, Vol. 12.2, pp. 164-170, (1991).
Davis, H. B., et al., "Ion release from, and fluoride recharge of a composite with a fluoride-containing bioactive glass". Dental Materials, Vol. 30(10), pp. 1187-1194, (2014).
Khoroushi, M., and Keshani, F., "A review of glass-ionomers: From conventional glass-ionomer to bioactive glass-ionomer", Dental research journal, Vol. 10.4, pp. 411, (2013).
Xie, D., Zhao, J., Weng, Y., Park, J.G., Jiang, H., Platt, J.A., "Bioactive glass-ionomer cement with potential therapeutic function to dentin capping mineralization", Eur J Oral Sci. Vol. 116, pp. 479–87, (2008).
Yli-Urpo, H., Lassila, L.V., Närhi, T., Vallittu, P.K., "Compressive strength and surface characterization of glass ionomer cements modified by particles of bioactive glass", Dent Mater. Vol. 21, pp. 201–9, (2005).
F. Kermani, S. M. Beidokhti, F. Baino, Z. Gholamzadeh-Virany, M. Mozafari, and S. Kargozar, “Strontium-and cobalt-doped multicomponent mesoporous bioactive glasses (MBGS) for potential use in bone tissue engineering applications,” Materials (Basel)., Vol. 13, pp. 1348-1368, (2020).
A. Fathi et al., “Three-dimensionally printed polycaprolactone/multicomponent bioactive glass scaffolds for potential application in bone tissue engineering,” Biomed. Glas., Vol. 6, pp. 57–69, (2021).
F. Kermani, A. Gharavian, S. Mollazadeh, S. Kargozar, A. Youssefi, and J. Vahdati Khaki, “Silicon-doped calcium phosphates; the critical effect of synthesis routes on the biological performance,” Mater. Sci. Eng. C, Vol. 111, pp. 110828, (2020).
F. Kermani, S. Kargozar, Z. Tayarani-Najaran, A. Yousefi, S. M. Beidokhti, and M. H. Moayed, “Synthesis of nano HA/βTCP mesoporous particles using a simple modification in granulation method,” Mater. Sci. Eng. C, Vol. 96, pp. 859-871, (2019).
Aronne, A., S. Esposito, and P. Pernice. "FTIR and DTA study of lanthanum aluminosilicate glasses." Materials chemistry and physics, Vol. 51, pp. 163-168, (1997).
Anand, Vikas, K. J. Singh, and Kulwinder Kaur. "Evaluation of zinc and magnesium doped 45S5 mesoporous bioactive glass system for the growth of hydroxyl apatite layer." Journal of non-crystalline solids, Vol. 406, pp. 88-94, (2014).
F. Kermani, S. Mollazadeh, S. Kargozar, and J. V. Khakhi, “Solution combustion synthesis (SCS) of theranostic ions doped biphasic calcium phosphates; kinetic of ions release in simulated body fluid (SBF) and reactive oxygen species (ROS) generation,” Mater. Sci. Eng. C, Vol. 118, pp. 111533, (2021).
F. Kermani, S. Mollazadeh, S. Kargozar, and J. V. Khakhi, “Improved Osteogenesis and angiogenesis of Theranostic ions doped calcium phosphates (CaPs) by a simple surface treatment process: A state-of-the-art study,” Mater. Sci. Eng. C, Vol. 124, pp. 112082, (2021).