Journal Of Metallurgical and Materials Engineering

Journal Of Metallurgical and Materials Engineering

Effect of voltage and time of electrodeposition on the electrocheromic charactristics of WO3

Document Type : Original Articles

Authors
Parisa Kazemizadeh 1
Mostafa Mirjalili 2
Ghasem Barati Darband 2
1 Ferdowsi University of Mashhad, Faculty of Engineering, Department of Metallurgical and Materials Engineering
2 Department of Metallurgy and Materials, Faculty of Engineering, Ferdowsi University of Mashhad
10.22067/jmme.2024.85499.1129
Abstract
Electrochromic materials change color when placed in an electric field. Among their most important applications we can mention electrochromic windows. These windows play an important role in saving energy as well as controlling the light and thermal conditions of the room. Tungsten oxide as an electrochromic material has attracted a lot of attention from researchers due to its high color efficiency. We studied the effect of voltage and time on the electrochromic properties to reach optimal conditions for tungsten oxide deposition using electrochemical deposition method. Optical and microstructural investigations and cyclic voltammetry were performed and showed that the cathodic voltage of -450 mV (versus Ag/AgCl reference electrode) and the deposition time of 3 minutes has improved the electrochromic characteristics of tungsten oxide layers in one molar sulfuric acid electrolyte. The color efficiency for this layer was 12.16 cm2/C and it has shown good stability up to 100 cycles.

keywords: electrochromic, electrodeposition, tungsten oxide, ITO glass
Keywords
electrochromic
electrodeposition
tungsten oxide
ITO glass
Subjects
[1] Y. Nishikitani, T. Asano, S. Uchida, and T. Kubo, "Thermal and optical behavior of electrochromic windows fabricated with carbon-based counterelectrode," Electrochimica Acta, vol. 44, no. 18, pp. 3211-3217, 1999. https://doi.org/10.1016/S0013-4686(99)00039-0
[2] M. Green and D. Richman, "A solid state electrochromic cell—the RbAg4I5/WO3 system," Thin Solid Films, vol. 24, no. 2, pp. S45-S46, 1974. https://doi.org/10.1016/0040-6090(74)90189-8
[3] S. H. Lee et al., "Crystalline WO3 nanoparticles for highly improved electrochromic applications," Advanced Materials, vol. 18, no. 6, pp. 763-766, 2006. https://doi.org/10.1002/adma.200501953
[4] R. J. Mortimer, "Electrochromic materials," Annual review of materials research, vol. 41, pp. 241-268, 2011. https://doi.org/10.1146/annurev-matsci-062910-100344
[5] G. Zhang et al., "Physical simulation model of WO3 electrochromic films based on continuous electron-transfer kinetics and experimental verification," ACS Applied Materials & Interfaces, vol. 13, no. 3, pp. 4768-4776, 2021. https://doi.org/10.1021/acsami.0c19993
[6] L. Jia, W. Ma, Q. Zhuang, Y. Zhang, and J. Dang, "Controllable Electrodeposition Adjusts the Electrochromic Properties of Co and Mo Co-Modified WO3 Films," Crystals, vol. 12, no. 2, p. 190, 2022. https://doi.org/10.3390/cryst12020190
[7] D. Calloway, "Beer-lambert law," Journal of Chemical Education, vol. 74, no. 7, p. 744, 1997.
[8] A. Azens, L. Kullman, G. Vaivars, H. Nordborg, and C. Granqvist, "Sputter-deposited nickel oxide for electrochromic applications," Solid State Ionics, vol. 113, pp. 449-456, 1998. https://doi.org/10.1016/S0167-2738(98)00309-9
[9] S. Y. Kim, T. Y. Yun, K. S. Yu, and H. C. Moon, "Reliable, high-performance electrochromic supercapacitors based on metal-doped nickel oxide," ACS Applied Materials & Interfaces, vol. 12, no. 46, pp. 51978-51986, 2020. https://doi.org/10.1021/acsami.0c15424
[10] M. Rao, "Structure and properties of WO3 thin films for electrochromic device application," J. Non-Oxide Glasses, vol. 5, pp. 1-8, 2013.
[11] A. Verma, A. Bakhshi, and S. Agnihotry, "Effect of citric acid on properties of CeO2 films for electrochromic windows," Solar energy materials and solar cells, vol. 90, no. 11, pp. 1640-1655, 2006. https://doi.org/10.1016/j.solmat.2005.09.001
[12] F. Decker, S. Passerini, R. Pileggi, and B. Scrosati, "The electrochromic process in non-stoichiometric nickel oxide thin film electrodes," Electrochimica Acta, vol. 37, no. 6, pp. 1033-1038, 1992. https://doi.org/10.1016/0013-4686(92)85220-F
[13] X. Xia, J. Tu, J. Zhang, X. Wang, W. Zhang, and H. Huang, "Electrochromic properties of porous NiO thin films prepared by a chemical bath deposition," Solar Energy Materials and Solar Cells, vol. 92, no. 6, pp. 628-633, 2008. https://doi.org/10.1016/j.solmat.2008.01.009
[14] F. Campus, P. Bonhote, M. Grätzel, S. Heinen, and L. Walder, "Electrochromic devices based on surface-modified nanocrystalline TiO2 thin-film electrodes," Solar Energy Materials and Solar Cells, vol. 56, no. 3-4, pp. 281-297, 1999. https://doi.org/10.1016/S0927-0248(98)00138-X
[15] C.-Y. Tai and J.-Y. Wu, "Observation of optical density modulation based on electrochromic tantalum oxide films," Journal of Physics D: Applied Physics, vol. 41, no. 6, p. 065303, 2008. https://doi.org/10.1088/0022-3727/41/6/065303
[16] F. Z. Tepehan, F. E. Ghodsi, N. Ozer, and G. G. Tepehan, "Optical properties of sol–gel dip-coated Ta2O5 films for electrochromic applications," Solar energy materials and solar cells, vol. 59, no. 3, pp. 265-275, 1999. https://doi.org/10.1016/S0927-0248(99)00041-0
[17] Y. Lu, L. Liu, D. Mandler, and P. S. Lee, "High switching speed and coloration efficiency of titanium-doped vanadium oxide thin film electrochromic devices," Journal of Materials Chemistry C, vol. 1, no. 44, pp. 7380-7386, 2013. https://doi.org/10.1039/C3TC31508H
[18] R. Romero, E. Dalchiele, F. Martín, D. Leinen, and J. Ramos-Barrado, "Electrochromic behaviour of Nb2O5 thin films with different morphologies obtained by spray pyrolysis," Solar Energy Materials and Solar Cells, vol. 93, no. 2, pp. 222-229, 2009. https://doi.org/10.1016/j.solmat.2008.10.012
[19] N. Sakai, Y. Ebina, K. Takada, and T. Sasaki, "Electrochromic films composed of MnO2 nanosheets with controlled optical density and high coloration efficiency," Journal of the Electrochemical Society, vol. 152, no. 12, p. E384, 2005. https://doi.org/10.1149/1.2104227
[20] C. R. Dhas, R. Venkatesh, R. Sivakumar, A. M. E. Raj, and C. Sanjeeviraja, "Effect of solution molarity on optical dispersion energy parameters and electrochromic performance of Co3O4 films," Optical Materials, vol. 72, pp. 717-729, 2017. https://doi.org/10.1149/1.2104227
[21] J. McIntyre, W. Peck, and S. Nakahara, "Oxidation state changes and structure of electrochromic iridium oxide films," Journal of The Electrochemical Society, vol. 127, no. 6, p. 1264, 1980. https://doi.org/10.1149/1.2129868
[22] H. Li, W. Zhang, and A. Y. Elezzabi, "Transparent zinc mesh electrodes for solar‐charging electrochromic windows," Advanced materials, vol. 32, no. 43, p. 2003574, 2020. https://doi.org/10.1002/adma.202003574
[23] G. Cai, A. L. S. Eh, L. Ji, and P. S. Lee, "Recent advances in electrochromic smart fenestration," Advanced Sustainable Systems, vol. 1, no. 12, p. 1700074, 2017. https://doi.org/10.1002/adsu.201700074
[24] P. Yang, P. Sun, and W. Mai, "Electrochromic energy storage devices," Materials today, vol. 19, no. 7, pp. 394-402, 2016. https://doi.org/10.1016/j.mattod.2015.11.007
[25] G. Mineo, F. Ruffino, S. Mirabella, and E. Bruno, "Investigation of WO3 electrodeposition leading to nanostructured thin films," Nanomaterials, vol. 10, no. 8, p. 1493, 2020. https://doi.org/10.3390/nano10081493
[26] W. Kwong, H. Qiu, A. Nakaruk, P. Koshy, and C. Sorrell, "Photoelectrochemical properties of WO3 thin films prepared by electrodeposition," Energy Procedia, vol. 34, pp. 617-626, 2013. https://doi.org/10.1016/j.egypro.2013.06.793
[27] K. Ç. Demir, "Corrosion behavior of electrodeposited WO3 thin films," Ceramics International, vol. 46, no. 4, pp. 4358-4364, 2020. https://doi.org/10.1016/j.ceramint.2019.10.159
[28] X. Li et al., "Enhanced Electrochromic Properties of Nanostructured WO3 Film by Combination of Chemical and Physical Methods," Coatings, vol. 11, no. 8, p. 959, 2021. https://doi.org/10.3390/coatings11080959
[29] Z. Yu, X. Jia, J. Du, and J. Zhang, "Electrochromic WO3 films prepared by a new electrodeposition method," Solar energy materials and solar cells, vol. 64, no. 1, pp. 55-63, 2000. https://doi.org/10.1016/S0927-0248(00)00043-X
[30] X.-b. Li and G.-r. Xu, "Hydrothermal vs electrodeposition: How does deposition method affect the electrochemical capacitor performance of manganese dioxide?," Ceramics International, vol. 43, no. 12, pp. 8963-8969, 2017. https://doi.org/10.1016/S0927-0248(00)00043-X
[31] V. H. V. Quy, I.-R. Jo, S.-H. Kang, and K.-S. Ahn, "Amorphous-crystalline dual phase WO3 synthesized by pulsed-voltage electrodeposition and its application to electrochromic devices," Journal of Industrial and Engineering Chemistry, vol. 94, pp. 264-271, 2021. https://doi.org/10.1016/j.jiec.2020.10.047
[32] Y. O. Kim, S.-H. Yu, K.-S. Ahn, S. K. Lee, and S. H. Kang, "Enhancing the photoresponse of electrodeposited WO3 film: Structure and thickness effect," Journal of Electroanalytical Chemistry, vol. 752, pp. 25-32, 2015. https://doi.org/10.1016/j.jelechem.2015.05.031
[33] M. Deepa, A. Srivastava, S. Singh, and S. Agnihotry, "Structure–property correlation of nanostructured WO3 thin films produced by electrodeposition," Journal of materials research, vol. 19, no. 9, pp. 2576-2585, 2004. https://doi.org/10.1557/JMR.2004.0336
[34] V. R. Buch, A. K. Chawla, and S. K. Rawal, "Review on electrochromic property for WO3 thin films using different deposition techniques," Materials Today: Proceedings, vol. 3, no. 6, pp. 1429-1437, 2016. https://doi.org/10.1016/j.matpr.2016.04.025
[35] M. Hepel, "Electrochromic WO3 films: Nanotechnology experiments in instrumental analysis and physical chemistry laboratories," Journal of chemical education, vol. 85, no. 1, p. 125, 2008. https://doi.org/10.1021/ed085p125
[36] G. Leftheriotis and P. Yianoulis, "Development of electrodeposited WO3 films with modified surface morphology and improved electrochromic properties," Solid State Ionics, vol. 179, no. 38, pp. 2192-2197, 2008. https://doi.org/10.1016/j.ssi.2008.07.018
[37] A. Kumar, C. S. Prajapati, and P. Sahay, "Modification in the microstructural and electrochromic properties of spray-pyrolysed WO3 thin films upon Mo doping," Journal of Sol-Gel Science and Technology, vol. 90, no. 2, pp. 281-295, 2019. https://doi.org/10.1007/s10971-019-04960-1
[38] V. S. Kumbhar et al., "Electrochromic and pseudocapacitive behavior of hydrothermally grown WO3 nanostructures," Thin Solid Films, vol. 709, p. 138214, 2020. https://doi.org/10.1016/j.tsf.2020.138214
[39] A. Babar, P. Deshamukh, R. Deokate, D. Haranath, C. Bhosale, and K. Rajpure, "Gallium doping in transparent conductive ZnO thin films prepared by chemical spray pyrolysis," Journal of Physics D: Applied Physics, vol. 41, no. 13, p. 135404, 2008. https://doi.org/10.1088/0022-3727/41/13/135404
 
 
 
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.