Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium

Document Type : Original Articles

Authors

1 Iran University of Science and Technology

2 China

Abstract

In this research, aluminizing packs containing NaF and NH4Cl activators were used for aluminizing of pure titanium samples at 1100 ºC. The results showed that the layers of TiAl3, TiAl2, γ-TiAl, α2-Ti3Al, and α-solid solution are formed on titanium samples in both cases. However, the weight gain and the thickness of TiAl3 layer in treated samples with NH4Cl activator are greater than those when NaF activator is used. Using a thermodynamic model showed that the partial pressures of aluminum-containing gases when NH4Cl is used are much greater and accordingly, the experimental results were justified.

Keywords


1. Leyens, C. and Peters, M., "Structure and properties of titanium and titanium alloys, Wiley- VCH, pp. 1-27, (2003).
2. Lutjering, G. and William, J. C., "Titanium", Springer, pp. 13-50, (2003).
3. Subrahmanyam, J. and Annapurna, J., "High temperature cyclic oxidation of aluminide layers on titanium", Oxidation of Metals, Vol. 26, pp. 275-285, (1986).
4. Deqing, W., Ziyuan, S. and Yingli, T., "Microstructure and oxidation of hot-dip aluminized titanium at high temperature", Applied Surface Science, Vol. 250, pp. 238-246, (2005).
5. Qian, Y.-H., Li, M.-S. and Lu, B., "Isothermal oxidation behavior of Ti3Al-based alloy at 700–
1000 °C in air", Transactions of Nonferrous Metals Society of China, Vol. 19, pp. 525-529, (2009).
6. Zhou, C. G., Xu, H. B. and Gong, S. K., "Study on aluminide coatings on TiAl alloys by pack cementation method", Acta Metallurgica Sinica (English Letters), Vol. 13, pp. 1148-1154, (2000).
7. Gurrappa, I. and Gogia, A. K., "High performance coatings for titanium alloys to protect against oxidation", Surface and Coatings Technology, Vol. 139, pp. 216-221, (2001).
8. Zhou, C., Xu, H., Gong, S. and Young Kim, K., "A study of aluminide coatings on TiAl alloys by the pack cementation method", Materials Science and Engineering A, Vol. 341, pp. 169-173, (2003).
9. Subrahmanyam, J., "Cyclic oxidation of aluminized Ti-14Al-24Nb alloy", Journal of Materials Science, Vol. 23, pp. 1906-1910, (1988).
10. Hodge, A. M. and Dunand, D. C., "Synthesis of nickel–aluminide foams by pack-aluminization of nickel foams", Intermetallics, Vol. 9, pp. 581-589, (2001).
11. Dunand, D. C., Hodge, A. M. and Schuh, C., "Pack aluminisation kinetics of nickel rods and foams", Materials Science and Technology, Vol. 18, pp. 326-332, (2002).
12. Choe, H. and Dunand, D. C., "Synthesis, structure, and mechanical properties of Ni-Al and Ni-Cr-Al superalloy foams", Acta Materialia, Vol. 52, pp. 1283-1295, (2004).
13. Levine, S. R. and Caves, R. M., "Thermodynamic and kinetics of pack aluminide coating formation on IN-100", Journal of the Electrochemical Society, Vol. 121, pp. 1051-1064, (1974).
14. Seigle, L. L., "Thermodynamics and kinetics of pack cementation processes.", Journal, Vol. pp. 345-369, (1984).
15. Gupta, B. K., Sarkhel, A. K. and Seigle, L. L., "On the kinetics of pack aluminization", Thin Solid Films, Vol. 39, pp. 313-320, (1976).
16. Sivakumar, R. and Seigle, L. L., "On the kinetics of the pack-aluminization process", Metallurgical Transactions A, Vol. 7 A, pp. 1073-1079, (1976).
17. Tu, D. C. and Seigle, L. L., "Kinetics of formation and microstructure of aluminide coatings on Ni-Cr alloys", Thin Solid Films, Vol. 95, pp. 47-56, (1982).
18. Kandasamy, N., Seigle, L. L. and Pennisi, F. J., "The kinetics of gas transport in halide-activated aluminizing packs", Thin Solid Films, Vol. 84, pp. 17-27, (1981).
19. Kandasamy, N., "Erratum: The kinetics of gas transport in halide-activated aluminizing packs ", Thin Solid Films, Vol. 503, pp. 277-278, (2006).
20. Nciri, B. and Vandenbulcke, L., "Thermodynamic study of the aluminizing of the iron and alloy steels by thermochemical technique", Journal of the Less Common Metals, Vol. 95, pp. 55-72, (1983).
21. Nciri, B. and Vandenbulcke, L., "Theoretical and experimental study of the aluminization of iron and steel in the pack and in the gas phase", Thin Solid Films, Vol. 139, pp. 311-324, (1986).
22. Kung, S. C. and Rapp, R. A., "Fundamental kinetic study of aluminization of iron by pack cementation at 900°C", Surface and Coatings Technology, Vol. 32, pp. 41-56, (1987).
23. Kung, S. C. and Rapp, R. A., "kinetic study of aluminization of iron by using the pack cementation technique", Journal of The Electrochemical Society, Vol. 135, pp. 731-741, (1987).
24. Raghavan, V., "Ti-Al phase Diagram", Journal of phase equilibrium and diffusion, Vol. 26, pp. 171-172, (2005).
25. کریمی زارچی, ح. ر. ، "بررسی تشکیل آلومیناید تیتانیم از طریق آلومینایزینگ گازی"، دانشکده مهندسی مواد و متالورژی، دانشگاه علم و صنعت ایران، (1392).
26. میرجلیلی, م.، "مکانیزم و سینتیک تشکیل ترکیبات بین فلزی در زوج نفوذی آلومینیوم-تیتانیم"، دانشکده مهندسی مواد و متالورژی، دانشگاه علم و صنعت ایران، (1391).
27. Eckert, M., Bencze, L., Kath, D., Nickel, H. and Hilpert, K., "Thermodynamic activities in the alloys of the Ti-Al system", Physical Chemistry Chemical Physics, Vol. 100, pp. 418-424, (1996).
28. Karimi Zarchi, H. R., Soltanieh, M., Aboutalebi, M. R. and Guo, X., "Thermodynamic study on pack aluminizing systems of pure titanium and nickel", Transactions of Nonferrous Metals Society of China, Vol. 23, pp. 1838-1846, (2013).
CAPTCHA Image