Investigation of Fuel Type on synthesis of ZnO nanostructure by solution combustion method

Document Type : Original Articles

Authors

1 Department of Materials Engineering, Faculty of Mechanics and Materials Engineering, Birjand University of Technology, Birjand, Iran

2 Department of chemical engineering, Faculty of mining, civil and chemical engineering , Birjand university of technology, Birjand, Iran.

3 PhD of Materials Science. Materials and Energy Research Center. Karaj. Iran

Abstract

Solution Combustion Synthesis (SCS) is based on oxidation and reduction reactions. In this investigation uses two types of fuel (Urea and Glycine). Zinc nitrate acts as oxidizer and fuels as reduction agents. Because SCS occurs at fast heating rates, in the first place DSC-TGA carried out from zinc nitrate in 3 rates of 10, 20 and 30 °C per minute. The results of these tests showed that the decomposition temperatures of zinc nitrate and glycine fuel are almost in the same range. Then the zinc oxide nanoparticles produced using these two fuels were examined using X-ray diffraction (XRD) test. The XRD results showed the prefect synthesis of ZnO in air atmosphere for both fuels. Glycine can synthesis the product better than urea and with more fine-grained structure. The better performance of glycine in the synthesis of nanoparticles with smaller dimensions can be attributed to the proximity of the decomposition temperature of zinc nitrate and glycine fuel and the role of this simultaneity in preventing the growth of zinc oxide crystals. So, the SEM images and EDX analysis are taken form this sample.

Keywords

Main Subjects


  1. Susanna, A., D'Arienzo, M., Di Credico, B., "Catalytic Effect of ZnO Anchored Silica Nanoparticles on Rubber Vulcanization and Cross-Link Formation", European Polymer Journal, Vol. 93, pp. 63-74, (2017)

    1. Ohtsu, N., Kakuchi, Y., Ohtsuki, T, "Antibacterial eEffect of Zinc Oxide/Hydroxyapatite Coatings Prepared by Chemical Solution Deposition", Applied Surface Science, Vol. 445, pp. 596-600, (2018).
    2. Boon Ong, C., Yong Ng, L., Mohammad, A., "A Review of ZnO Nanoparticles as Solar Photocatalysts: Synthesis, Mechanisms and Applications", Renewable and Sustainable Energy Reviews, Vol. 81, No. 1, pp. 536-551, (2018).
    3. SaboorSyed, A., Shah, M., Hussain, H., "Band Gap Tuning and Applications of ZnO Nanorods in Hybrid Solar Cell: Ag-Doped Verses Nd-Doped ZnO Nanorods", Materials Science in Semiconductor Processing, Vol. 93, pp. 215-225, (2019).
    4. Mingming, S., Tanglei, Z., Jun, S., "Homogeneous ZnO Nanowire Arrays p-n Junction for Blue Light-Emitting Diode Applications", Optics Express, Vol. 27, No. 16, pp. 1207-1215, (2019).
    5. Gollavilli, H., Aswathi, R., Renuka, R.S., Managuli, S., "Naringin Nano-Ethosomal Novel Sunscreen Creams: Development and Performance Evaluation", Colloids and Surfaces B: Biointerfaces, Vol. 193, pp. 111-122 (2020).
    6. Bhutta, Z., Ashar, A., Mahfooz, A., "Enhanced Wound Healing Activity of Nano ZnO and Nano Curcuma Longa in Third-Degree Burn", Applied Nanoscience, Vol. 11, pp. 1267-1278, (2021).
    7. Manikandan, B., Endo, T., Kaneko, S., "Properties of Sol Gel Synthesized ZnO Nanoparticles", Journal of Materials Science: Materials in Electronics, Vol. 29, No. 9, pp. 9474–9485, (2018).
    8. Golmohammadi, M., Towfighi, J., Hosseinpour, M., Ahmadi, S.J., "An Investigation into the Formation and Conversion of Metal Complexes to Metal Oxide Nanoparticles in Supercritical Water", The journal of supercritical fluids, Vol. 107, pp. 699-706, (2016).
    9. Pineda-Reyes, A., Olvera, M., "Synthesis of ZnO Nanoparticles from Water-in-Oil (w/o) Microemulsions", Materials Chemistry and Physics, Vol. 203, pp. 141-147, (2018).
    10. Singh, J., ChandSingh, R., "Structural, Optical, Dielectric and Transport Properties of Ball Mill Synthesized ZnO–V2O5 Nano-Composite", Journal of Molecular Structure, Vol. 1215, pp. 128-261, (2018).
    11. Wang, Q., Zhang, C., Zhang, H., "Influence of CaF2 on the Preparation of ZnO Via SHS Method", Inorganic and Nano-Metal Chemistry, Vol. 50, No. 8, pp. 587-591, (2020).
    12. Subrahmanyam, J., Vijayakumar, M., "Self-Propagating High-Temperature Synthesis", Journal of Materials Science, Vol. 27, pp. 6249–6273, (1992).
    13. Wang, C., Yu, F., Zhu, M., "Highly Selective Catalytic Reduction of NOx by MnOx–CeO2–Al2O3 Catalysts Prepared by Self-Propagating High-Temperature Synthesis", Journal of Environmental Sciences, Vol. 75, pp. 124-135, (2019).
    14. Nasiri, H., Vahdati Khaki, J., Haddad Sabzevar, M., "Fast Prepared Ni-Al2O3 Nanocomposite through Solution Combustion Synthesis", Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, Vol. 45, No.8, pp. 1241-1244, (2015).
    15. Aali, H., Azizi, N., Javadi Baygi, N., "High Antibacterial and Photocatalytic Activity of Solution Combustion Synthesized Ni0.5Zn0.5Fe2O4 Nanoparticles: Effect of Fuel to Oxidizer Ratio and Complex Fuels", Ceramics International, Vol. 45, No. 15, pp. 19127-19140, (2019).
    16. Mohammadi, E., Nasiri, H., Vahdati Khaki, J., "Copper-Alumina Nanocomposite Coating on Copper Substrate through Solution Combustion", Ceramics International, Vol. 44, No. 3, pp. 3226-3230, (2018).
    17. Kalantari Bolaghi, Z., Hasheminiasari, M., Masoudpanah, S. M., "Solution Combustion Synthesis of ZnO Powders Using Mixture of Fuels in Closed System", Vol. 44, No. 11, pp. 12684-12690, (2018).
    18. Haoyang,W., Mingli, Q., Aimin, C., Zhiqin, C., Pengqi, C., Ye, L., Xuanhui, Q., "Effect of Urea on the Synthesis of Al-Doped ZnO Nanoparticle and its Adsorptive Properties for Organic Pollutants", Ceramics International, Materials Research Bulletin, Vol. 75, pp. 78-82, (2016).
    19. Nasiri, H., Bahrami Motlagh, E., Vahdati Khak, J., "Role of Fuel/Oxidizer Ratio on the Synthesis Conditions of Cu–Al2O3 Nanocomposite Prepared through Solution Combustion Synthesis", Materials Research Bulletin, Vol. 47, No. 11, pp. 3676-3680, (2012).
    20. Deshpande, K., Mukasyan, A., Varma, A., "Direct Synthesis of Iron Oxide Nanopowders by the Combustion Approach: Reaction Mechanism and Properties", Chemistry of Materials, Vol. 16, No. 24, pp. 4896–4904, (2004).
    21. Tahmasebi, K., Paydar, M. H., "The Effect of Starch Addition on Solution Combustion Synthesis of Al2O3–ZrO2 Nanocomposite Powder Using Urea as Fuel", Materials Chemistry and Physics, Vol. 109, No. 1, pp. 156-163, (2008).
    22. Schaber, P., Colson. J., Higgins. S., "Thermal Decomposition (Pyrolysis) of Urea in an Open Reaction Vessel", Thermochimica Acta, Vol. 424, No. 1-2, pp. 131-142, (2004).
    23. Honarmand, M., Golmohammadi, M., Hafezi-bakhtiari, J., "Synthesis and Characterization of SnO2 NPs for Photodegradation of Eriochrome Black-T Using Response Surface Methodology", Environmental Science and Pollution Research, Vol. 28, pp. 7123–7133, (2021).

     

     

CAPTCHA Image