One of the crucial parameters to tune the various properties of nanoparticles, such as mechanical, physical, optical, magnetical, electrical, and biological properties is their structure and morphologies. In the present study, zinc oxide (ZnO) and cupric oxide (CuO) nanoparticles were synthesized via the co-precipitation method with the same protocols. The phase structures and morphologies of the prepared nanoparticles were investigated using an X-ray diffractometer (XRD) and scanning electron microscopy (SEM), respectively. The obtained results revealed that no additional phase forms during the synthesis of ZnO and CuO nanoparticles. The evaluation of the phase structure and morphologies of the prepared nanoparticles exhibited that ZnO and CuO nanoparticles were shaped in different morphologies. ZnO and CuO nanoparticles were shaped in the spherical-diamond-like and hierarchical flower-like structures due to their various crystallographic structures and electrostatic interaction mechanism between different anions and polar surfaces. Indeed, these behaviors lead to the formation of different morphologies and structures.
Gopal, V.V., and Kamila, S., "Effect of Temperature on the Morphology of Zno Nanoparticles: A Comparative Study", Applied Nanoscience, Vol. 7, No. 75, pp. 3-4, (2017).
Adam, R.E., Pozina, G., Willander, M., and Nur, O., "Synthesis of ZnO Nanoparticles by Co-Precipitation Method for Solar Driven Photodegradation of Congo Red Dye at Different ph", Photonics Nanostructures-Fundamentals Applications, Vol. 32, pp. 11-18, (2018).
Jiang, J., Pi, J., and Cai, J., "The Advancing of Zinc Oxide Nanoparticles for Biomedical Applications", Bioinorganic Chemistry Applications, (2018).
Kołodziejczak-Radzimska, A., and Jesionowski, T., "Zinc Oxide—from Synthesis to Application: A Review", Materials, Vol. 7, No. 4, pp. 2833-2881, (2014).
Nayak, S., Chaudhari, A., and Vaidhun, B., "Synthesis, Characterization and Ameliorative Properties of Food, Formulation and Cosmetic Additives: Case Study of Zinc Oxide Nanoparticles", Journal of Excipients Food Chemicals, Vol. 11, No. 4, pp. 79-92, (2020).
Anbalagan, A.K., Gupta, S., Kumar, A., Haw, S.C., Kulkarni, S.S., Tai, N.H., Tseng, F.G., Hwang, K.C., and Lee, C.H., "Gamma Ray Irradiation Enhances the Linkage of Cotton Fabrics Coated with ZnO Nanoparticles", ACS Omega, Vol. 5, No. 25, pp. 15129-15135, (2020).
Golmohammadi, M., Honarmand, M., and Ghanbari, S., "Spectroscopy B: A Green Approach to Synthesis of ZnO Nanoparticles Using Jujube Fruit Extract and their Application in Photocatalytic Degradation of Organic Dyes", Spectrochimica Acta Part A: Molecular Biomolecular Spectroscopy, Vol. 229, Pp. 117961, (2020).
Kumar, M., Bansal, M., and Garg, R., "An Overview of Beneficiary Aspects of Zinc Oxide Nanoparticles on Performance of Cement Composites", Materials Today: Proceedings, Vol. 43, pp. 892-898, (2021).
Alimohamady, R., Aliarabi, H., Bruckmaier, R.M., and Christensen, R.G., "Effect of Different Sources of Supplemental Zinc on Performance, Nutrient Digestibility, and Antioxidant Enzyme Activities in Lamb", Biological Trace Element Research, Vol. 189, No. 1, pp. 75-84, (2019).
Huang, S., Wu, W., Su, Y., Qiao, L., and Yan, Y., "Insight into the Corrosion Behaviour and Degradation Mechanism of Pure Zinc in Simulated Body Fluid", Corrosion Science, Vol. 178, pp. 109071, (2021).
Machotová, J., Kalendová, A., Voleská, M., Steinerová, D., Pejchalová, M., Knotek, P., and Zárybnická, L., "Waterborne Hygienic Coatings Based on Self-Crosslinking Acrylic Latex with Embedded Inorganic Nanoparticles: A Comparison of Nanostructured ZnO and MgO as Antibacterial Additives", Progress in Organic Coatings, Vol. 147, pp. 105704, (2020).
El-Trass, A., ElShamy, H., El-Mehasseb, I., and El-Kemary, M., "CuO Nanoparticles: Synthesis, Characterization, Optical Properties and Interaction with Amino Acids", Applied Surface Science, Vol. 258, No. 7, pp. 2997-3001, (2012).
Sultana, J., Paul, S., Saha, R., Sikdar, S., Karmakar, A., and Chattopadhyay, S., "Optical and Electronic Properties of Chemical Bath Deposited P-CuO and N-ZnO Nanowires on Silicon Substrates: P-CuO/N-ZnO Nanowires Solar Cells with High Open-Circuit Voltage and Short-Circuit Current", Thin Solid Films, Vol. 699, pp. 137861, (2020).
Ahmad, R., Khan, M., Mishra, P., Jahan, N., Ahsan, M. A., Ahmad, I., Khan, M.R., Watanabe, Y., Syed, M. A., and Furukawa, H., "Engineered Hierarchical CuO Nanoleaves Based Electrochemical Nonenzymatic Biosensor for Glucose Detection", Journal of the Electrochemical Society, Vol. 168, No. 1, pp. 017501, (2021).
Patil, P., Nakate, U.T., Nakate, Y.T., and Ambare, R.C., "Acetaldehyde Sensing Properties Using Ultrafine CuO Nanoparticles", Materials Science in Semiconductor Processing, Vol. 101, pp. 76-81, (2019).
Tan, R., Wei, Z., Liang, J., Lv, Z., Chen, B., Qu, J., Yan, W., and Ma, J., "Enhanced Open-Circuit Photovoltage and Charge Collection Realized in Pearl-Like NiO/CuO Composite Nanowires Based P-Type Dye Sensitized Solar Cells", Materials Research Bulletin, Vol. 116, pp. 131-136, (2019).
Pan, Y., Jiang, S., Xiong, W., Liu, D., Li, M., He B., Fan, X., and Luo, D., "Supported CuO Catalysts on Metal-Organic Framework (Cu-UiO-66) for Efficient Catalytic Wet Peroxide Oxidation of 4-Chlorophenol in Wastewater", Microporous Mesoporous Materials, Vol. 291, pp. 109703, (2020).
Almasi, H., Jafarzadeh, P., and Mehryar, L., "Fabrication of Novel Nanohybrids by Impregnation of CuO Nanoparticles into Bacterial Cellulose and Chitosan Nanofibers: Characterization, Antimicrobial and Release Properties", Carbohydrate Polymers, Vol. 186, pp. 273-281, (2018).
Shaheen, T.I., Fouda, A., and Salem, S.S., "Integration of Cotton Fabrics with Biosynthesized CuO Nanoparticles for Bactericidal Activity in the Terms of their Cytotoxicity Assessment", Industrial Engineering Chemistry Research, Vol. 60, No. 4, pp. 1553-1563, (2021).
Tharchanaa, S., Priyanka, K., Preethi, K., and Shanmugavelayutham, G., "Facile Synthesis of Cu and CuO Nanoparticles from Copper Scrap Using Plasma Arc Discharge Method and Evaluation of Antibacterial Activity", Materials Technology, Vol. 36, No. 2, pp. 97-104, (2021).
Baiyasi, R., Gallagher, M.J., McCarthy, L.A., Searles, E.K., Zhang, Q., Link, S., and Landes, C.F., "Quantitative Analysis of Nanorod Aggregation and Morphology from Scanning Electron Micrographs Using Semseg", The Journal of Physical Chemistry A, Vol. 124, No. 25, pp. 5262-5270, (2020).
Fatieiev, Y., Croissant, J.G., Alamoudi, K., and Khashab, N.M., "Cellular Internalization and Biocompatibility of Periodic Mesoporous Organosilica Nanoparticles with Tunable Morphologies: From Nanospheres to Nanowires", ChemPlusChem, Vol. 82, No. 4, pp. 631-637, (2017).
Wang, X., He, J., Yu, B., Sun, B., Yang, D., Zhang, X., Zhang, Q., Zhang, W., Gu, L., and Chen, Y., "Cose2 Nanoparticles Embedded Mof-Derived Co-Nc Nanoflake Arrays as Efficient and Stable Electrocatalyst for Hydrogen Evolution Reaction", Applied Catalysis B: Environmental, Vol. 258, pp. 117996, (2019).
Habibi, S., and Jamshidi, M., "Synthesis of Tio2 Nanoparticles Coated on Cellulose Nanofibers with Different Morphologies: Effect of the Template and Sol-Gel Parameters", Materials Science in Semiconductor Processing, Vol. 109, pp. 104927, (2020).
Dastan, D., "Effect of Preparation Methods on the Properties of Titania Nanoparticles: Solvothermal Versus Sol–Gel", Applied Physics A, Vol. 123, No. 11, pp. 1-13, (2017).
Piñero, S., Camero, S., and Blanco, S., "Silver Nanoparticles: Influence of the Temperature Synthesis on the Particles’ Morphology", Journal of Physics: Conference Series, Vol. 786, No. 1, IOP Publishing, (2017).
Lu, J., Wang, J., Hassan, K.T., Talmantaite, A., Xiao, Z., Hunt, M.R., and Šiller, L., "Morphology Control of Nickel Nanoparticles Prepared in Situ within Silica Aerogels Produced by Novel Ambient Pressure Drying", Scientific Reports, Vol. 10, No. 1, pp. 1-9, (2020).
Maharsi, R., Septianto, R., Rohman, F., Iskandar, F., Devianto, H., and Budhi, Y., "Effect of Temperature and Precursor Concentration on the Morphology of Cu/γ-al2o3 Prepared Via Urea Combustion Method", Materials Research Express, Vol. 4, No. 4, pp. 044002, (2017).
Yu, L., Zhang, G., Wu, Y., Bai, X., and Guo, D., "Cupric Oxide Nanoflowers Synthesized with a Simple Solution Route and their Field Emission", Journal of Crystal Growth, Vol. 310, No. 12, pp. 3125-3130, (2008).
Li, Z., Wang, J., Wang, N., Yan, S., Liu, W., Fu, Y.Q., and Wang, Z., "Hydrothermal Synthesis of Hierarchically Flower-Like Cuo Nanostructures with Porous Nanosheets for Excellent H2S Sensing", Journal of Alloys and Compounds, Vol. 725, pp. 1136-1143, (2017).
Zhang, H., Feng, J., and Zhang, M., "Preparation of Flower-Like Cuo by a Simple Chemical Precipitation Method and their Application as Electrode Materials for Capacitor", Materials Research Bulletin, Vol. 43, No. 12, pp. 3221-3226, (2008).
Zou, Y., Li, Y., Zhang, N., and Liu, X., "Flower-Like Cuo Synthesized by Ctab-Assisted Hydrothermal Method", Bulletin of Materials Science, Vol. 34, No. 4, pp. 967-971, (2011).
Yang, Z., Xu, J., Zhang, W., Liu, A., and Tang, S., "Controlled Synthesis of Cuo Nanostructures by a Simple Solution Route", Journal of Solid State Chemistry, Vol. 180, No. 4, pp. 1390-1396, (2007).
Yu, L., Zhang, G., Li, S., Xi, Z., and Guo, D., "Fabrication of Arrays of Zinc Oxide Nanorods and Nanotubes in Aqueous Solution under an External Voltage", Journal of Crystal Growth, Vol. 299, No. 1, pp. 184-188, (2007).
Liu, J., Huang, X., Li, Y., Sulieman, K., He, X., and Sun, F., "Hierarchical Nanostructures of Cupric Oxide on a Copper Substrate: Controllable Morphology and Wettability", Journal of Materials Chemistry, Vol. 16, No. 45, pp. 4427-4434, (2006).
Chun Zeng, H., "Ostwald Ripening: A Synthetic Approach for Hollow Nanomaterials", Current Nanoscience, Vol. 3, No. 2, pp. 177-181, (2007).
Wen, J., Hu, Y., Zhu, K., Li, Y., and Song, J., "High-Temperature-Mixing Hydrothermal Synthesis of Zno Nanocrystals with Wide Growth Window", Current Applied Physics, Vol. 14, No. 3, pp. 359-365, (2014).
Joo, J., Chow, B.Y., Prakash, M., Boyden, E.S., and Jacobson, J.M., "Face-Selective Electrostatic Control of Hydrothermal Zinc Oxide Nanowire Synthesis", Nature Materials, Vol. 10, No. 8, pp. 596-601, (2011).
Johari, N., Zohari, F., & Rafati, F. (2022). Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method. Journal Of Metallurgical and Materials Engineering, 33(1), 97-106. doi: 10.22067/jmme.2021.72313.1027
MLA
Narges Johari; Faezeh Zohari; Fatemeh Rafati. "Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method", Journal Of Metallurgical and Materials Engineering, 33, 1, 2022, 97-106. doi: 10.22067/jmme.2021.72313.1027
HARVARD
Johari, N., Zohari, F., Rafati, F. (2022). 'Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method', Journal Of Metallurgical and Materials Engineering, 33(1), pp. 97-106. doi: 10.22067/jmme.2021.72313.1027
VANCOUVER
Johari, N., Zohari, F., Rafati, F. Evaluation of the morphologies and formation mechanisms of ZnO and CuO nanoparticles synthesized via the co-precipitation method. Journal Of Metallurgical and Materials Engineering, 2022; 33(1): 97-106. doi: 10.22067/jmme.2021.72313.1027
Send comment about this article