Keyword Index

A

  • Accumulative roll bonding The Effect Of simultaneous Use Of Mg and SiC Particles On The Tensile Properties Of The Al-Mg-SiC Hybrid Composite Produced By Accumulative Roll-Bonding Process (ARB) [Volume 25, Issue 1, 2013-2014]
  • Accumulative roll bonding Investigation of Mechanical and Magnetic Properties of Cu/Ni/Fe3O4 Multi-Layer Composite Produced by Accumulative Roll Bonding (ARB) [Volume 25, Issue 2, 2013-2014]
  • Active Screen Plasma Nitriding (ASPN) The Effects of Nitriding Parameters in Hot Working Steel AISI H13 on its Surface Properties and Nitride Layers during Conventional and Active Screen Plasma Nitriding Treatments [Volume 25, Issue 1, 2013-2014]
  • Adhesion Impact of Strontium Aluminum Polyphosphate Anticorrosion Pigment on Performance of Protective Epoxy Coating [Volume 25, Issue 2, 2013-2014]
  • Aging An Investigation into the Effect of Zinc and Age Hardening Treatment on Impression Creep Resistance of Mg-5%Sn Alloy [Volume 25, Issue 1, 2013-2014]
  • Alloying Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2013-2014]
  • Annealing Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2013-2014]
  • Anorthite An Investigation into the Phase Formation during Calcination of Kaolin and Calcite Mixture [Volume 25, Issue 1, 2013-2014]
  • Anticorrosion Pigment Impact of Strontium Aluminum Polyphosphate Anticorrosion Pigment on Performance of Protective Epoxy Coating [Volume 25, Issue 2, 2013-2014]
  • Archaeometallurgy Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2013-2014]
  • Austenitic Manganese steel Correlation between Twinning and Surface Rumpling Phenomenon during Plastic Deformation of Austenitic Manganese Steel [Volume 25, Issue 2, 2013-2014]

B

  • Bioglass؛ Coating Evaluation of the Properties of 45S5 Bioglass Coating on 316L Stainless Steel Substrate [Volume 25, Issue 1, 2013-2014]
  • Bronze Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2013-2014]

C

  • Calcium aluminosilicates An Investigation into the Phase Formation during Calcination of Kaolin and Calcite Mixture [Volume 25, Issue 1, 2013-2014]
  • Cetyltrimethylammonium bromide The Effect Of Anionic And Cationic Surfactants On Electrodeposition Of Ni/TiN Nanocomposite Coating [Volume 25, Issue 2, 2013-2014]
  • CK45 steel Effect of grain size on diffusion of nitrogen in heat treated CK45 plain carbon steel [Volume 25, Issue 2, 2013-2014]
  • Climb controlled dislocation creep An Investigation into the Effect of Zinc and Age Hardening Treatment on Impression Creep Resistance of Mg-5%Sn Alloy [Volume 25, Issue 1, 2013-2014]
  • Conventional Plasma Nitriding (CPN) The Effects of Nitriding Parameters in Hot Working Steel AISI H13 on its Surface Properties and Nitride Layers during Conventional and Active Screen Plasma Nitriding Treatments [Volume 25, Issue 1, 2013-2014]
  • Copper Matte Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2013-2014]
  • Corrosion behavior Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed Metal Oxides Coating Synthesized by Sol-Gel Method in Chloride solution [Volume 25, Issue 2, 2013-2014]
  • Corrosion behaviour Corrosion behaviour investigation of the four Cr-Mn-(Ni-free) austenitic steels in 0.1 M H2SO4 solution [Volume 25, Issue 2, 2013-2014]
  • Cr-Mn austenitic steel Corrosion behaviour investigation of the four Cr-Mn-(Ni-free) austenitic steels in 0.1 M H2SO4 solution [Volume 25, Issue 2, 2013-2014]

D

  • Duty cycle The Effects of Nitriding Parameters in Hot Working Steel AISI H13 on its Surface Properties and Nitride Layers during Conventional and Active Screen Plasma Nitriding Treatments [Volume 25, Issue 1, 2013-2014]

E

F

  • Flow stress؛ Dynamic recrystallization A Study of the Flow Behaviour of a Nb-V-Ti Microalloyed Steel during Hot Compression Test [Volume 25, Issue 1, 2013-2014]
  • Fracture surface The Effect Of simultaneous Use Of Mg and SiC Particles On The Tensile Properties Of The Al-Mg-SiC Hybrid Composite Produced By Accumulative Roll-Bonding Process (ARB) [Volume 25, Issue 1, 2013-2014]
  • Frequency The Effects of Nitriding Parameters in Hot Working Steel AISI H13 on its Surface Properties and Nitride Layers during Conventional and Active Screen Plasma Nitriding Treatments [Volume 25, Issue 1, 2013-2014]

G

  • Gehlenite An Investigation into the Phase Formation during Calcination of Kaolin and Calcite Mixture [Volume 25, Issue 1, 2013-2014]

H

  • Haft Tappeh Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2013-2014]
  • Hardness Impact of Strontium Aluminum Polyphosphate Anticorrosion Pigment on Performance of Protective Epoxy Coating [Volume 25, Issue 2, 2013-2014]
  • Heat treatment Effect of grain size on diffusion of nitrogen in heat treated CK45 plain carbon steel [Volume 25, Issue 2, 2013-2014]
  • Hybrid composite The Effect Of simultaneous Use Of Mg and SiC Particles On The Tensile Properties Of The Al-Mg-SiC Hybrid Composite Produced By Accumulative Roll-Bonding Process (ARB) [Volume 25, Issue 1, 2013-2014]

I

  • Impression creep An Investigation into the Effect of Zinc and Age Hardening Treatment on Impression Creep Resistance of Mg-5%Sn Alloy [Volume 25, Issue 1, 2013-2014]

K

  • Keyword: calcareous deposits An Investigation of the Effect of Potential on Crystal Form and Corrosion Resistance of the Calcareous Deposits on Low Carbon Steel in Natural Seawater [Volume 25, Issue 2, 2013-2014]

L

  • Layered structures Investigation of Mechanical and Magnetic Properties of Cu/Ni/Fe3O4 Multi-Layer Composite Produced by Accumulative Roll Bonding (ARB) [Volume 25, Issue 2, 2013-2014]

M

  • Magnesium Aluminide Compressive Behavior of a High-Strength Al-Based Nanocomposite Reinforced with Magnesium Aluminide Nanoparticles [Volume 25, Issue 1, 2013-2014]
  • Magnetic and mechanical properties Investigation of Mechanical and Magnetic Properties of Cu/Ni/Fe3O4 Multi-Layer Composite Produced by Accumulative Roll Bonding (ARB) [Volume 25, Issue 2, 2013-2014]
  • Mechanical milling Compressive Behavior of a High-Strength Al-Based Nanocomposite Reinforced with Magnesium Aluminide Nanoparticles [Volume 25, Issue 1, 2013-2014]
  • Mg-Sn alloy An Investigation into the Effect of Zinc and Age Hardening Treatment on Impression Creep Resistance of Mg-5%Sn Alloy [Volume 25, Issue 1, 2013-2014]
  • Microalloyed Steel A Study of the Flow Behaviour of a Nb-V-Ti Microalloyed Steel during Hot Compression Test [Volume 25, Issue 1, 2013-2014]
  • Mixed metal oxides coating Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed Metal Oxides Coating Synthesized by Sol-Gel Method in Chloride solution [Volume 25, Issue 2, 2013-2014]
  • MoSi2 An Investigation into the Wear Behaviour of Aluminum (AA2124) Matrix Composite Reinforced with Intermetallic MoSi2 Particles [Volume 25, Issue 1, 2013-2014]

N

  • Nanocomposite Compressive Behavior of a High-Strength Al-Based Nanocomposite Reinforced with Magnesium Aluminide Nanoparticles [Volume 25, Issue 1, 2013-2014]
  • Nanocomposite The Effect Of Anionic And Cationic Surfactants On Electrodeposition Of Ni/TiN Nanocomposite Coating [Volume 25, Issue 2, 2013-2014]
  • Nanoparticle Compressive Behavior of a High-Strength Al-Based Nanocomposite Reinforced with Magnesium Aluminide Nanoparticles [Volume 25, Issue 1, 2013-2014]

P

  • Planetary ball mill An Investigation into the Phase Formation during Calcination of Kaolin and Calcite Mixture [Volume 25, Issue 1, 2013-2014]
  • Potentiodynamic polarization Corrosion behaviour investigation of the four Cr-Mn-(Ni-free) austenitic steels in 0.1 M H2SO4 solution [Volume 25, Issue 2, 2013-2014]
  • Potentiodynamic Polarization test Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed Metal Oxides Coating Synthesized by Sol-Gel Method in Chloride solution [Volume 25, Issue 2, 2013-2014]
  • Protective Primer Impact of Strontium Aluminum Polyphosphate Anticorrosion Pigment on Performance of Protective Epoxy Coating [Volume 25, Issue 2, 2013-2014]

R

  • Roasting Archaeometallurgy and Smelting Technology of Copper in Haft Tappeh Ancient Site of Khuzestan; The Second Millennium BC [Volume 25, Issue 2, 2013-2014]
  • Rumpling Correlation between Twinning and Surface Rumpling Phenomenon during Plastic Deformation of Austenitic Manganese Steel [Volume 25, Issue 2, 2013-2014]

S

  • Sodium dodecylsulfate The Effect Of Anionic And Cationic Surfactants On Electrodeposition Of Ni/TiN Nanocomposite Coating [Volume 25, Issue 2, 2013-2014]
  • Sol-gel؛ corrosion Evaluation of the Properties of 45S5 Bioglass Coating on 316L Stainless Steel Substrate [Volume 25, Issue 1, 2013-2014]
  • Sol-gel method Evaluation of Corrosion Behavior of Al2O3/MgO/TiO2 Mixed Metal Oxides Coating Synthesized by Sol-Gel Method in Chloride solution [Volume 25, Issue 2, 2013-2014]
  • Stacking fault energy Correlation between Twinning and Surface Rumpling Phenomenon during Plastic Deformation of Austenitic Manganese Steel [Volume 25, Issue 2, 2013-2014]

T

  • T6 heat treatment An Investigation into the Wear Behaviour of Aluminum (AA2124) Matrix Composite Reinforced with Intermetallic MoSi2 Particles [Volume 25, Issue 1, 2013-2014]
  • Tensile test The Effect Of simultaneous Use Of Mg and SiC Particles On The Tensile Properties Of The Al-Mg-SiC Hybrid Composite Produced By Accumulative Roll-Bonding Process (ARB) [Volume 25, Issue 1, 2013-2014]
  • Twining Correlation between Twinning and Surface Rumpling Phenomenon during Plastic Deformation of Austenitic Manganese Steel [Volume 25, Issue 2, 2013-2014]