A
-
Al3Zr, Heat treatment
Synthesis of Nanocrystalline Al3Zr Intermetallic Compound by Mechanical Alloying and Heat Treatment [Volume 26, Issue 2, 2014-2015, Pages 11-22]
-
Alomina
Fabrication of TiO2-Al2O3-HA Nanobiocomposite by Sintering method and Evalution of In Vitro Bioactivity for Orthopedic Applications [Volume 26, Issue 1, 2014-2015, Pages 69-84]
-
Al-Si alloy
Effect of slope casting method combined with melt treatment on morphology of silicon in Al-17% Si alloy [Volume 26, Issue 1, 2014-2015, Pages 27-40]
-
Alumina
An Investigation of the Strength Properties of Aluminium-Based Composite Foams Produced by Powder Metallurgy Method [Volume 26, Issue 2, 2014-2015, Pages 75-84]
-
Alumina – Titania
The Study of Wear Behaviour of Alumina-Titania Composite Coating Produced by Plasma Spraying Technique [Volume 26, Issue 2, 2014-2015, Pages 37-50]
-
Aluminizing
Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium [Volume 26, Issue 1, 2014-2015, Pages 13-26]
-
Aluminum
Sequence and Mechanism of Reactions in Ilmenite and Aluminum System [Volume 26, Issue 2, 2014-2015, Pages 51-62]
-
Amorphous phase
Analysis of Thermodynamics Factors Affecting The Formation of Nanostrucured Super Saturated Solution in Mechanical Alloying of The Cu-Fe System [Volume 26, Issue 2, 2014-2015, Pages 23-36]
-
AZ91 Mg alloy
Corrosion Behavior of Electrodeposited Nickel Coatings on AZ91 Mg Alloy [Volume 26, Issue 2, 2014-2015, Pages 1-10]
B
-
Bioactivity
Fabrication of TiO2-Al2O3-HA Nanobiocomposite by Sintering method and Evalution of In Vitro Bioactivity for Orthopedic Applications [Volume 26, Issue 1, 2014-2015, Pages 69-84]
-
Borosiliconizing
The Effect of Processing Parameters of Borosiliconizing Treatment in H11 Hot Work Tool Steel [Volume 26, Issue 2, 2014-2015, Pages 99-108]
C
-
Coercivity
The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2014-2015, Pages 85-98]
-
Composite
Investigating the effect of nano-silica on the wear performance of the UHMWPE based composite reinforced with short carbon fibers [Volume 26, Issue 2, 2014-2015, Pages 109-117]
-
Composite Foam
An Investigation of the Strength Properties of Aluminium-Based Composite Foams Produced by Powder Metallurgy Method [Volume 26, Issue 2, 2014-2015, Pages 75-84]
-
Compression Tension
An Investigation of the Strength Properties of Aluminium-Based Composite Foams Produced by Powder Metallurgy Method [Volume 26, Issue 2, 2014-2015, Pages 75-84]
-
Core loss
The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2014-2015, Pages 85-98]
-
Cu
Pulse Current Efficiency in Coating Process of Gold Nanoparticles from Potassium Dicyanoaurate Solution [Volume 26, Issue 1, 2014-2015, Pages 41-52]
-
Cysteine
Pulse Current Efficiency in Coating Process of Gold Nanoparticles from Potassium Dicyanoaurate Solution [Volume 26, Issue 1, 2014-2015, Pages 41-52]
D
-
Diffusion coating
The Effect of Processing Parameters of Borosiliconizing Treatment in H11 Hot Work Tool Steel [Volume 26, Issue 2, 2014-2015, Pages 99-108]
E
-
EIS
Corrosion Behavior of Electrodeposited Nickel Coatings on AZ91 Mg Alloy [Volume 26, Issue 2, 2014-2015, Pages 1-10]
-
Elastic properties
The Study of Wear Behaviour of Alumina-Titania Composite Coating Produced by Plasma Spraying Technique [Volume 26, Issue 2, 2014-2015, Pages 37-50]
-
Erosion performance
The Study of Wear Behaviour of Alumina-Titania Composite Coating Produced by Plasma Spraying Technique [Volume 26, Issue 2, 2014-2015, Pages 37-50]
-
Ethylene octene copolymer
Study of surface morphology, thermal and mechanical properties of composite polyamide 6- gamma alumina modified with ethylene octin copolymer graft maleic anhydride [Volume 26, Issue 2, 2014-2015, Pages 63-74]
F
-
Fe-P alloys
The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2014-2015, Pages 85-98]
-
Fe-TiC/Al2O3 composites
Sequence and Mechanism of Reactions in Ilmenite and Aluminum System [Volume 26, Issue 2, 2014-2015, Pages 51-62]
G
-
Gold Nanoparticles
Pulse Current Efficiency in Coating Process of Gold Nanoparticles from Potassium Dicyanoaurate Solution [Volume 26, Issue 1, 2014-2015, Pages 41-52]
H
-
Hot work tool steel
The Effect of Processing Parameters of Borosiliconizing Treatment in H11 Hot Work Tool Steel [Volume 26, Issue 2, 2014-2015, Pages 99-108]
-
Hybrid
Investigating the effect of nano-silica on the wear performance of the UHMWPE based composite reinforced with short carbon fibers [Volume 26, Issue 2, 2014-2015, Pages 109-117]
-
Hydroxyapatite
Fabrication of TiO2-Al2O3-HA Nanobiocomposite by Sintering method and Evalution of In Vitro Bioactivity for Orthopedic Applications [Volume 26, Issue 1, 2014-2015, Pages 69-84]
I
-
Ilmenite
Sequence and Mechanism of Reactions in Ilmenite and Aluminum System [Volume 26, Issue 2, 2014-2015, Pages 51-62]
-
Indium-Tin Oxide
Pulse Current Efficiency in Coating Process of Gold Nanoparticles from Potassium Dicyanoaurate Solution [Volume 26, Issue 1, 2014-2015, Pages 41-52]
-
Interface
Analysis of Thermodynamics Factors Affecting The Formation of Nanostrucured Super Saturated Solution in Mechanical Alloying of The Cu-Fe System [Volume 26, Issue 2, 2014-2015, Pages 23-36]
-
Intermetallic compounds
Synthesis of Nanocrystalline Al3Zr Intermetallic Compound by Mechanical Alloying and Heat Treatment [Volume 26, Issue 2, 2014-2015, Pages 11-22]
L
-
Liquid phase sintering
Joining of Al-Foam to Plate in Sandwich Structures [Volume 26, Issue 1, 2014-2015, Pages 97-104]
M
-
Magnetic induction
The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2014-2015, Pages 85-98]
-
Mechanical alloying
Synthesis of Nanocrystalline Al3Zr Intermetallic Compound by Mechanical Alloying and Heat Treatment [Volume 26, Issue 2, 2014-2015, Pages 11-22]
-
Mechanical alloying
Analysis of Thermodynamics Factors Affecting The Formation of Nanostrucured Super Saturated Solution in Mechanical Alloying of The Cu-Fe System [Volume 26, Issue 2, 2014-2015, Pages 23-36]
-
Mechanical properties
Study of surface morphology, thermal and mechanical properties of composite polyamide 6- gamma alumina modified with ethylene octin copolymer graft maleic anhydride [Volume 26, Issue 2, 2014-2015, Pages 63-74]
-
Metallic foam
Joining of Al-Foam to Plate in Sandwich Structures [Volume 26, Issue 1, 2014-2015, Pages 97-104]
-
Microstructure
The Study of Wear Behaviour of Alumina-Titania Composite Coating Produced by Plasma Spraying Technique [Volume 26, Issue 2, 2014-2015, Pages 37-50]
-
Microstructure
The Effect of Phosphorous on Microstructure and Magnetic Properties of Fe Based Alloys [Volume 26, Issue 2, 2014-2015, Pages 85-98]
-
Molybdenite
The Effect of Mechanical Activation and Sodium Carbonate on the Kinetics of Molybdenite Carbothermic Reduction [Volume 26, Issue 1, 2014-2015, Pages 53-68]
N
-
Nanobiocomposite
Fabrication of TiO2-Al2O3-HA Nanobiocomposite by Sintering method and Evalution of In Vitro Bioactivity for Orthopedic Applications [Volume 26, Issue 1, 2014-2015, Pages 69-84]
-
Nickel-Chrome resistor
synthesis of a special enamel for Nickel-Chrome resistor and characterizing the viscosity and surface tension [Volume 26, Issue 1, 2014-2015, Pages 85-96]
-
Nickel electrodeposition
Corrosion Behavior of Electrodeposited Nickel Coatings on AZ91 Mg Alloy [Volume 26, Issue 2, 2014-2015, Pages 1-10]
P
-
Pack aluminizing reactions
Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium [Volume 26, Issue 1, 2014-2015, Pages 13-26]
-
Pack Cementation
The Effect of Processing Parameters of Borosiliconizing Treatment in H11 Hot Work Tool Steel [Volume 26, Issue 2, 2014-2015, Pages 99-108]
-
Partitioning
Microstructure and Mechanical Properties of a Low Alloy High Carbon Steel Processed by Quenching and Partitioning Process [Volume 26, Issue 1, 2014-2015, Pages 105-116]
-
Plasma electrolytic oxidation
Plasma Electrolytic Oxidation of 2024-T3 Aluminum Alloy and Study of Its Corrosion Resistance and Tribological Behavior [Volume 26, Issue 1, 2014-2015, Pages 1-12]
-
Plasma spray coatings
The Study of Wear Behaviour of Alumina-Titania Composite Coating Produced by Plasma Spraying Technique [Volume 26, Issue 2, 2014-2015, Pages 37-50]
-
Polarization
Corrosion Behavior of Electrodeposited Nickel Coatings on AZ91 Mg Alloy [Volume 26, Issue 2, 2014-2015, Pages 1-10]
-
Polyamide 6
Study of surface morphology, thermal and mechanical properties of composite polyamide 6- gamma alumina modified with ethylene octin copolymer graft maleic anhydride [Volume 26, Issue 2, 2014-2015, Pages 63-74]
-
Potassium iodide
Pulse Current Efficiency in Coating Process of Gold Nanoparticles from Potassium Dicyanoaurate Solution [Volume 26, Issue 1, 2014-2015, Pages 41-52]
-
Pulse Electrodeposition
Pulse Current Efficiency in Coating Process of Gold Nanoparticles from Potassium Dicyanoaurate Solution [Volume 26, Issue 1, 2014-2015, Pages 41-52]
S
-
SEM
Investigating the effect of nano-silica on the wear performance of the UHMWPE based composite reinforced with short carbon fibers [Volume 26, Issue 2, 2014-2015, Pages 109-117]
-
Silicium Carbide
An Investigation of the Strength Properties of Aluminium-Based Composite Foams Produced by Powder Metallurgy Method [Volume 26, Issue 2, 2014-2015, Pages 75-84]
-
Sintering
Fabrication of TiO2-Al2O3-HA Nanobiocomposite by Sintering method and Evalution of In Vitro Bioactivity for Orthopedic Applications [Volume 26, Issue 1, 2014-2015, Pages 69-84]
-
Structural sandwich
Joining of Al-Foam to Plate in Sandwich Structures [Volume 26, Issue 1, 2014-2015, Pages 97-104]
-
Super saturated solid solution
Analysis of Thermodynamics Factors Affecting The Formation of Nanostrucured Super Saturated Solution in Mechanical Alloying of The Cu-Fe System [Volume 26, Issue 2, 2014-2015, Pages 23-36]
-
Surface tension
synthesis of a special enamel for Nickel-Chrome resistor and characterizing the viscosity and surface tension [Volume 26, Issue 1, 2014-2015, Pages 85-96]
T
-
Thermal properties
Study of surface morphology, thermal and mechanical properties of composite polyamide 6- gamma alumina modified with ethylene octin copolymer graft maleic anhydride [Volume 26, Issue 2, 2014-2015, Pages 63-74]
-
Thermodynamical-chemical model
Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium [Volume 26, Issue 1, 2014-2015, Pages 13-26]
-
Thermodynamics
Analysis of Thermodynamics Factors Affecting The Formation of Nanostrucured Super Saturated Solution in Mechanical Alloying of The Cu-Fe System [Volume 26, Issue 2, 2014-2015, Pages 23-36]
-
Titania
Fabrication of TiO2-Al2O3-HA Nanobiocomposite by Sintering method and Evalution of In Vitro Bioactivity for Orthopedic Applications [Volume 26, Issue 1, 2014-2015, Pages 69-84]
-
Titanium aluminide
Thermodynamic Investigation of Pack Aluminizing Process of Pure Titanium [Volume 26, Issue 1, 2014-2015, Pages 13-26]
U
-
UHMWPE
Investigating the effect of nano-silica on the wear performance of the UHMWPE based composite reinforced with short carbon fibers [Volume 26, Issue 2, 2014-2015, Pages 109-117]
Your query does not match with any item