Journal Of Metallurgical and Materials Engineering

Journal Of Metallurgical and Materials Engineering

Investigation of Recrystallization Kinetics, Microstructural Evolution, and Mechanical Properties of Twin-Roll Cast AA8011 Aluminum Alloy Sheet during Annealing

Document Type : Original Articles

Authors
1 School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran, Iran
2 School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran, Iran.
Abstract
In this study, the effect of annealing treatment on the microstructure and mechanical properties of cold- rolled AA8011 aluminum alloy sheets produced by twin- roll casting was investigated. After cold rolling with a 43% reduction in thickness 4.5 mm, the samples were annealed at temperatures ranging from 300 °C to 600 °C. An eddy current test was employed as a non-destructive method to monitor recovery and recrystallization processes. The microscopic results showed that annealing temperature plays a key role in the evolution of microstructure, grain size, and distribution of intermetallic particles (Al- Fe- Si). Kinetic analysis based on the JMAK model indicated that the Avrami exponent increases with temperature, leading to accelerated nucleation. At temperature of 600 °C, a more uniform microstructure with finer grains and more spherical intermetallic particles was obtained. These changes were accompanied by improved mechanical properties, and 600 °C was identified as the optimum annealing temperature.
Keywords
Subjects

 
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.