بررسی تأثیر تغییر شکل گرم بر ریزساختار آلیاژ منیزیم AZ91

نوع مقاله : علمی و پژوهشی

نویسندگان

1 دانشگاه تربیت معلم سبزوار

2 دانشگاه شیراز

3 دانشگاه فردوسی مشهد

چکیده

در سالهای اخیر مطالعات زیادی بر روی رفتار تغییر شکل گرم و ریزساختار آلیاژهای ریختنی منیزیم انجام شده است. دلیل انجام آنها، افزایش کاربرد آلیاژهای منیزیم می باشد. اگر چه مطالعات بسیاری بر روی ریزساختار آلیاژهای کار شدهی منیزیمی پس از تغییر شکل گرم انجام شده است، امّا اطلاعات ریزساختاری مربوط به تغییر شکل گرم آلیاژهای ریختنی منیزیمی بسیار محدود است. در مطالعهی حاضر، تغییرات ریزساختاری آلیاژ منیزیم AZ91 حین تغییر شکل گرم بررسی شده است. ابتدا نمونهها در محدوده دمایی 425-350 oC با نرخ کرنش 0.1 s-1 و به میزانهای کرنش پیک 0.3 و 0.5 فشرده شدند. تغییرات ریزساختاری بهوسیلهی میکروسکپهای نوری و الکترونی بررسی شدند. نتایج نشان دادند که دانههای تبلور مجدد حین تغییر شکل گرم بر روی مرزهای اولیه جوانه میزنند. کسر دانههای تبلور مجدد یافته با افزایش میزان کرنش بهشکل سیگمودال و مطابق با رابطهی اَورامی افزایش یافت. افزون بر این، اندازهی دانههای تبلور مجدد یافته در ابتدا افزایش و پس از رسیدن بهمیزان بیشینهی خود کاهش یافت.

کلیدواژه‌ها


عنوان مقاله [English]

The Effect of Hot Deformation on the Microstructure of AZ91 Magnesium Alloy

نویسندگان [English]

  • Ali reza maldar 1
  • ramin Ebrahimi 2
  • gholam reza Ebrahimi 3
چکیده [English]

Due to the great variety of applications of magnesium alloys with superior mechanical properties, recent studies have been focused on the hot deformation behavior and microstructure of magnesium alloy castings. Although there have been several recent investigations on the microstructure of wrought magnesium alloys after hot deformation, a limited number of studies have been conducted with regard to the evolution of grain structure during hot working processes. The present work examines the microstructural evolution during hot deformation of magnesium alloy AZ91. The specimens were hot compressed to the peak strain values of 0.3 and 0.5 at the temperature range of 350 to 425 °C with the strain rate of 0.1 s−1. Structural changes were studied using the optical and scanning electron microscopes. The results showed that the recrystallized grains nucleate along the pre-existing grain boundaries during the compression process. The fraction of dynamically recrystallized grains increased with an increase in the strain value in a sigmoidal way expressed by Avrami equation. The dynamically recrystallized grain size also increased at the beginning with strain, and then decreased after its maximum value being reached

کلیدواژه‌ها [English]

  • Magnesium Alloy AZ91
  • Dynamic Recrystallization
  • β Precipitates
  • Hot Deformation
  • Microstructure
CAPTCHA Image