Gupta, M., and Ling, S.,''Microstructure and mechanical properties of hypo/hyper-eutectic Al-Si alloys synthesized using near-net shape forming technique'', Journal of Alloys and Compounds,pp. 284-294, (1999).
2. Kyffin, W., Rainforth,W. and Jones, H.,''Effect of treatment variables on size refinement by phosphide inoculants of primary silicon in hypereutectic Al-Si alloys'',Materials Science and Technology, pp. 901-905, (2001).
3. Li,P., Nikitin,V.I.,and.Kandalova,E.G ,''Effect of melt overheating, cooling and solidification rates on Al-16%Si alloy structure'',Materials Science and Engineering A,pp. 371-374, (2002).
4. Chong,C., Zhong,L.I.and Bo,R.E.,''Influences of complex modification of P and RE on microstructure and mechanical properties of hypereutectic Al-20Si alloy'',Transactions of Nonferrous Metals Society of China, pp. 301-306, (2007).
5. Bian,X.,Ma,J. and Ma,Z., ''Thermal-rate treatment of molten Al-Si alloys", Chinese Journal of Mechanical Engineering,Vol. 5, pp. 176-182, (1992).
6. Bian,X., Qin,J. and Wang,S.i., ''The atomic-structhre changes in Al-16%Si alloy above the liquidius'', Metallurgical and Materials Transactions A,pp. 2163-2168, (2000).
7. Xu,C.L. and Jiang,Q.C, ''Morphologies of primary silicon in hypereutectic Al-Si alloys with melt overheating temperature and cooling rate'',Materials Science and Engineering A, pp. 451-455, (2006).
8. Diewwanit,A., ''Semi-solid processing of hypereutectic aluminum–silicon alloys'', MIT, (1996).
9. Hga, T. and Kapranos,P., ''Microstructure at Semi-solid condition of Al alloy Strip Cast using a Twin Roll Caster'', 7th Int. Conf. on Semi-Solid Proc.Of Alloys and Composites, Japan, (2002).
10. Hga, T. and Kapranos,P., ''Rheocasting Processes using a Cooling Slope plate Low Superheat Casting'', 7th Int. Conf. on Semi-Solid Proc. of Alloys and Composites, Japan, ( 2002).
11. Birol,Y.,''Cooling slope casting and thixoforming of hypereutectic A390 alloy'', Journal of Materials processing Technology, pp. 200-203, (2008).
12. Birol,Y.,''A357 thixoforming feedstock produced by cooling slope casing'', Journal of Materials processing Technology, pp. 94-101, (2007).
13. Hekmat-Ardakan, Alireza.Ajersch, Frank.''Effect of isothermal aging on the semi-solid microstructure of rheoprocessed and partially remelted of A390 alloy with 10% Mg addition'', Material Characterization, pp.778-785, (2010).
14. Taghavi,F. and GhasemiA.,''Study on the effects of the length and angle of inclined plate on the microstructure of A356 aluminum alloy'',Material and Design, pp.1762-1767,(2009).
15. Birol,Y.,''Semi-solid processing of the primary aluminum die casting alloy A365'' ,Journal of Alloys and Compounds, pp. 133-138, (2009).
16. Haga,T. and Suzuki,Sh.,''Casting of aluminum alloy ingots for thixoforming using a cooling slope'',Journal of Materials Processing Technology, pp. 169-172, (2001).
17. Fredriksson, H. and Akerlind, A.,"Materials Processing during Casting", John Wiley & Sons, Ltd., Chichester, pp. 77-86, (2006).
18. Bian, X. and Wang,W., ''Thermal-rate treatment and structure transformation of Al-13%Si alloy melt'', Materials Letters, pp. 54-58, (2000).
19. Sun,Y., Wang, Q.and Geng,H.,''Effects of complex modificating technique on microstructure and mechanical properties of hypereutectic Al-Si alloys'', Journal of Materials Science, pp. 2104-2109, (2012).
20. West, R. and Fredrikssson, H., ''On the mechanism of facetted growth'', Journal of Materials Science, pp. 1061-1068, (1985).
21. Dai,H.S. and Liu,X.F., ''Optimal holding temperatures and phosphorus additions for primary silicon refinement in Al-high Si alloys'',Materials Science and Technology, pp. 1183-1188, (2009).
22. Langer, E., "ASM Handbook, Vol. 3", ASM International, USA, pp.1105, (1998).
23. Zhang,J., Fan, Z.and Zhou, L., ''Microstructure development of Al-15% Mg2Si in situ composite with mischmetal addition'',Materials Science and Engineering A, pp. 104-112,(2000).
24. Nogita,K., Drennan, J.and Dahle,A.,''Evaluation of Silicon Twinning in Hypoeutectic Al-Si alloys'',Materials Transactions, pp. 625-628, (2003).
25. Chang, J., Moon, I. and Choi, C., ''Refinement of cast microstructure of hypereutectic Al-Si alloys through the addition of rare earth metals'', Journal of Materials Science, Vol. 33, pp. 5015-5023,(1998).
26. قلم باز، م. ، شاهمیری، م. و کریم خرازی.، '' بررسی اثر سطح شیبدار روی سیلیسیم اولیه و سیلیسیم یوتکتیک در آلیاژ A390 ''،ششمین همایش علمی-دانشجویی مهندسی مواد و متالورژی،دانشگاه علم و صنعت ایران، (1385).
27. Jiang, Q.C., Xu, C.L., Lu, M.and Wang,H.Y., ''Effect of new Al-P-Ti-TiC-Y modifier on primary silicon in hypereutectic Al-Si alloys'',Materials Letters, pp. 624-628,(2005).
)
ارسال نظر در مورد این مقاله